Skip to main content
Schneider Electric ATV212HD22N4LCD

Schneider ATV212HD22N4LCD AC Drive, 22 kW / 30 hp, 480 V

MPN ATV212HD22N4LCD
Obsolete

Schneider Electric Altivar 212 ATV212HD22N4LCD AC Drive (VFD) 480V, 22 kW / 30 hp, 33.1 A at 480 V, IP20, integrated C2 EMC filter, Modbus RTU, CE.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

ATV212HD22N4LCD specifications
ParameterValue
Connector type1 RJ45 1 open style
Main product or component typeVariable speed drive
Voltage= 1 mOhm 500 V DC for 1 minute
Current33.1 A at 480 V 41.6 A at 380 V
Horsepower30 hp
Frequency50...60 Hz - 5...5 %
Temp storage max70 °C
Temp storage min-25 °C
Temp operating max50 °C
Temp operating min-10 °C
Storage temperature-25...70 °C
Pollution degree3 conforming to IEC 61800-5-1
Depth214 mm
Width240 mm
Height420 mm
Data format8 bits, 1 stop, odd even or no configurable parity
Operating positionVertical +/- 10 degree

Product details

22 kW VFD with integrated C2 EMC filter

The ATV212HD22N4LCD is a 22 kW (30 hp) AC drive from the Altivar 212 series, designed for asynchronous motors in commercial and light industrial applications. It delivers 33.1 A at 480 V and 41.6 A at 380 V, with an integrated Class C2 EMC filter that meets EN 61800-3 Category C2 and C3 environments — meaning it can be installed in first-environment (residential) locations with a filter, and second-environment (industrial) without additional filtering. The drive includes a built-in adjustable PI regulator for closed-loop process control (pressure, flow, temperature) and a full suite of protections: thermal overload, short-circuit between motor phases, input phase loss, DC bus overvoltage/undervoltage, and motor PTC probe input.

Communication and I/O for panel integration

Standard Modbus RTU over a 2-wire RS-485 bus (RJ45 connector) at 9600 or 19200 bps, RTU frame format, supporting up to 247 addresses — drop it onto a Modbus network with minimal configuration. The drive also accepts a LonWorks option card for building automation networks. Analog inputs are switch-configurable for voltage (0–10 V DC) or current (0–20 mA), with 10-bit resolution; one input can also accept PTC probes for motor thermal protection. The digital I/O and relay outputs handle start/stop, fault reset, and speed reference selection without an extra PLC module.

Mounting and environmental limits

The drive measures 240 mm wide x 420 mm high x 214 mm deep, with a vertical mounting tolerance of ±10 degrees. It requires 100 mm clearance above and below for airflow — the integrated fan moves 214 m³/h, and the noise level is 59.9 dB. Operating altitude is up to 1000 m without derating; above that, derate 1% per 100 m up to 3000 m (limited to 2000 m for corner-grounded networks). Rated for pollution degree 3 (IEC 61800-5-1) and 5–95% relative humidity without condensation. Shock resistance is 15 gn for 11 ms per IEC 60068-2-27 — suitable for machine-mounted installations with moderate vibration.

Lifecycle and sourcing posture

Sourced to order against the BOM quantity through authorized distribution channels.

MPN
ATV212HD22N4LCD