Skip to main content
Schneider Electric ATV212WD15N4

Schneider ATV212WD15N4 AC Drive (VFD) 480V, 15 kW, 3-phase

MPN ATV212WD15N4
Active

Schneider Electric Altivar 212 ATV212WD15N4 AC drive, 15 kW, 3-phase 480 V, 22.6 A line current, integrated Class C2 EMC filter, CE/UL/CSA.

$1,564.64 – $3,454.67 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

ATV212WD15N4 key specifications
ParameterValue
Connector type1 RJ45 1 open style
Main product or component typeVariable speed drive
Voltage= 1 mOhm 500 V DC for 1 minute
Current22.6 A 480 V 28.4 A 380 V
Frequency50...60 Hz - 5...5 %
Phases3-phase
IP ratingIP55
Temp storage max70 °C
Temp storage min-25 °C
Temp operating max40 °C
Temp operating min-10 °C
Storage temperature-13...158 °F (-25...70 °C)

All specifications

ATV212WD15N4 additional specifications
ParameterValue
Pollution degreePollution degree 2
Depth12.4 in (315 mm)
Width11.4 in (290 mm)
Height22.05 in (560 mm)
Data format8 bits, 1 stop, odd even or no configurable parity
Operating positionVertical +/- 10 degree
Operating temperature14...104 °F (-10...40 °C) without derating 104...122 °F (40...50 °C) with derating factor

Product details

What this drive delivers on a 480 V line

The ATV212WD15N4 is an Altivar 212 AC drive rated for 15 kW output on a 3-phase 480 V supply — sized for asynchronous motors in pump, fan, and conveyor duty where the load profile stays within the drive's constant-torque curve. Line current at 480 V is 22.6 A; at 380 V it draws 28.4 A, so the upstream protection and cable sizing follow the higher figure when the supply is on the low side of the tolerance band.

Regulatory and installation fit

The integrated Class C2 EMC filter covers most industrial power-distribution layouts without an external filter. Pollution degree 2 per IEC 61800-5-1 and a 15 gn / 11 ms shock rating per IEC 60068-2-27 mean it handles the vibration and contamination levels typical of a panel-mounted drive near a motor or gearbox.

Lifecycle and sourcing posture

The lifecycle stage is marked as mature — this is not a new-introduction or end-of-life flag, but it means the drive has been in the field long enough that spares and replacements are stable through distribution. No official successor order code is recorded.

Protection and control depth

Built-in protections cover overheating, short-circuit between motor phases, input phase loss, overcurrent between output phases and earth, DC-bus overvoltage, and motor thermal protection with PTC probe support — the drive can shut down on a winding overtemperature without an external relay. An adjustable PI regulator is onboard for closed-loop process control — pressure, flow, or level loops can be tuned directly in the drive without a separate controller. The analogue input stage is switch-configurable between voltage (0–10 V DC) and current (0–20 mA) with 10-bit resolution, and one input can serve as a PTC probe interface for motor temperature feedback.

MPN
ATV212WD15N4