Skip to main content
Schneider Electric ATV212WD22N4CZH28

Schneider ATV212WD22N4CZH28 AC Drive, 22 kW, 30 hp, 480 V

MPN ATV212WD22N4CZH28
Obsolete

Schneider Electric Altivar 212 ATV212WD22N4CZH28 AC drive, 22 kW / 30 hp, 480 V, integrated Class C1 EMC filter, RS-485 Modbus, IP20.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

ATV212WD22N4CZH28 specifications
ParameterValue
Connector type1 open style 1 RJ45
Main product or component typeVariable speed drive
Voltage= 1 mOhm 500 V DC for 1 minute
Current33.1 A at 480 V 41.1 A at 380 V
Horsepower30 hp
Frequency50...60 Hz - 5...5 %
IP ratingIP54
Temp storage max70 °C
Temp storage min-25 °C
Temp operating max50 °C
Temp operating min-10 °C
Storage temperature-25...70 °C
Pollution degree3 conforming to IEC 61800-5-1
Depth315 mm
Width284 mm
Height720 mm
Data format8 bits, 1 stop, odd even or no configurable parity
Operating positionVertical +/- 10 degree

Product details

22 kW / 30 hp VFD with integrated C1 EMC filter

The ATV212WD22N4CZH28 is a Schneider Electric Altivar 212 AC drive rated for 22 kW (30 hp) at 480 V, designed for asynchronous motors. It draws 33.1 A at 480 V and 41.1 A at 380 V, with an apparent power of 33.2 kVA at 380 V. An integrated Class C1 EMC filter means this drive meets the strictest conducted emission limits for residential and light industrial environments — no external filter needed for most installations.

Panel fit and mounting

Dimensions are 720 mm high, 284 mm wide, and 315 mm deep — a substantial footprint that requires adequate enclosure depth and side clearance for airflow. The drive is assembled with a heat sink and must be mounted vertically (±10°) for proper convection cooling.

Fieldbus and control interface

Standard RS-485 physical interface using 2-wire Modbus RTU at 9600 or 19200 bps, supporting up to 247 addresses. An optional LonWorks communication card is available for building automation integration. Analog inputs are switch-configurable for voltage (0–10 V DC) or current (0–20 mA) with 10-bit resolution, and one input can also accept PTC probe signals for motor thermal protection.

Protection and compliance suite

Built-in protections cover overheating, short-circuit between motor phases, earth faults, DC bus overvoltage, input phase loss, and motor thermal protection via PTC probes. The drive carries CE marking and complies with IEC 61800-3 for EMC environments 1 and 2 across categories C1, C2, and C3, plus IEC 61800-5-1 for safety.

MPN
ATV212WD22N4CZH28