Skip to main content
Log in
Schneider Electric ATV212WD22N4CZH28 — AC Drive (VFD) 480V

Schneider ATV212WD22N4CZH28 AC Drive, 22 kW, 30 hp, 480 V

MPNATV212WD22N4CZH28
Obsolete

Schneider Electric Altivar 212 ATV212WD22N4CZH28 AC drive, 22 kW / 30 hp, 480 V, integrated Class C1 EMC filter, RS-485 Modbus, IP20.

Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

ATV212WD22N4CZH28 — Identification
ParameterValue
Product typeVariable speed drive
Device short nameATV212
Product range / familyAltivar 212
ATV212WD22N4CZH28 — Power & Output
ParameterValue
Motor power (kW)22 kW
Continuous output current43.5 A at 380 V 43.5 A at 460 V
Max. transient current47.9 A for 60 s
Apparent power33.2 kVA at 380 V
ATV212WD22N4CZH28 — Input / Supply
ParameterValue
Rated supply voltage range380...480 V - 15...10 %
Input line current33.1 A at 480 V 41.1 A at 380 V
Network number of phases3 phases
ATV212WD22N4CZH28 — Control & Performance
ParameterValue
Output frequency range0.5...200 Hz
Asynchronous motor control modesVoltage/frequency ratio - Energy Saving, quadratic U/f Voltage/frequency ratio, automatic IR compensation (U/f + automatic Uo) Voltage/frequency ratio, 5 points Voltage/frequency ratio, 2 points Flux vector control without sensor, standard
ATV212WD22N4CZH28 — Protection & EMC
ParameterValue
Integrated EMC filter classClass C1 EMC filter integrated
Protection functionsOverheating protection: drive Thermal power stage: drive Short-circuit between motor phases: drive Input phase breaks: drive Overcurrent between output phases and earth: drive Overvoltages on the DC bus: drive Break on the control circuit: drive Against exceeding limit speed: drive Line supply overvoltage and undervoltage: drive Line supply undervoltage: drive Against input phase loss: drive Thermal protection: motor Motor phase break: motor With PTC probes: motor
EMC immunity testsElectrostatic discharge immunity test level 3 conforming to IEC 61000-4-2 Radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3 Electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4 1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5 Conducted radio-frequency immunity test level 3 conforming to IEC 61000-4-6 Voltage dips and interruptions immunity test conforming to IEC 61000-4-11
Prospective short-circuit current (Isc)22 kA
ATV212WD22N4CZH28 — Mechanical & Cooling
ParameterValue
IP degree of protectionIP54 conforming to EN/IEC 61800-5-1 IP54 conforming to EN/IEC 60529
Acoustic noise level59.9 dB conforming to 86/188/EEC
Assembly / installation styleWith heat sink
ATV212WD22N4CZH28 — Environmental
ParameterValue
Operating ambient temperature-10...40 °C (without derating) 40...50 °C (with derating factor)
Operating altitude1000...3000 m limited to 2000 m for the Corner Grounded distribution network with current derating 1 % per 100 m <= 1000 m without derating
Relative humidity5...95 % without condensation conforming to IEC 60068-2-3 5...95 % without dripping water conforming to IEC 60068-2-3
Storage / transport temperature-25...70 °C
Pollution degree3 conforming to IEC 61800-5-1
Vibration resistance1.5 mm (f= 3...13 Hz) conforming to EN/IEC 60068-2-6 1 gn (f= 13...200 Hz) conforming to EN/IEC 60068-2-8
ATV212WD22N4CZH28 — Approvals
ParameterValue
Certifications & markingCE
Standards complianceIEC 61800-3 EN 61800-3 environments 1 category C2 IEC 61800-3 environments 1 category C3 EN 61800-3 IEC 61800-3 category C1 IEC 61800-5-1 IEC 61800-3 environments 2 category C3 EN 61800-3 environments 1 category C3 EN 61800-3 environments 1 category C1 IEC 61800-3 environments 2 category C2 IEC 61800-3 environments 2 category C1 IEC 61800-3 environments 1 category C1 EN 61800-3 environments 2 category C3 EN 61800-3 category C1 IEC 61800-3 environments 1 category C2 EN 61800-5-1 EN 61800-3 environments 2 category C2 EN 55011 group 1 class B EN 61800-3 environments 2 category C1
ATV212WD22N4CZH28 — Communication
ParameterValue
Communication protocolsLonWorks Modbus APOGEE FLN METASYS N2 BACnet

Product details

22 kW / 30 hp VFD with integrated C1 EMC filter

The ATV212WD22N4CZH28 is a Schneider Electric Altivar 212 AC drive rated for 22 kW (30 hp) at 480 V, designed for asynchronous motors. It draws 33.1 A at 480 V and 41.1 A at 380 V, with an apparent power of 33.2 kVA at 380 V. An integrated Class C1 EMC filter means this drive meets the strictest conducted emission limits for residential and light industrial environments — no external filter needed for most installations.

Panel fit and mounting

Dimensions are 720 mm high, 284 mm wide, and 315 mm deep — a substantial footprint that requires adequate enclosure depth and side clearance for airflow. The drive is assembled with a heat sink and must be mounted vertically (±10°) for proper convection cooling.

Fieldbus and control interface

Standard RS-485 physical interface using 2-wire Modbus RTU at 9600 or 19200 bps, supporting up to 247 addresses. An optional LonWorks communication card is available for building automation integration. Analog inputs are switch-configurable for voltage (0–10 V DC) or current (0–20 mA) with 10-bit resolution, and one input can also accept PTC probe signals for motor thermal protection.

Protection and compliance suite

Built-in protections cover overheating, short-circuit between motor phases, earth faults, DC bus overvoltage, input phase loss, and motor thermal protection via PTC probes. The drive carries CE marking and complies with IEC 61800-3 for EMC environments 1 and 2 across categories C1, C2, and C3, plus IEC 61800-5-1 for safety.

Frequently asked questions

What is the switching frequency range and derating for this drive?

The switching frequency is adjustable from 6 to 16 kHz, with derating required above 8 kHz. Running at 16 kHz reduces audible motor noise but lowers the continuous output current capacity.

MPN
ATV212WD22N4CZH28