Skip to main content
Schneider Electric ATV6000C190A3333NA3

Schneider ATV6000C190A3333NA3 ATV6000, 333 A line, 1520 kW

MPN ATV6000C190A3333NA3
Active

Schneider Electric Altivar Process ATV6000, 333 A line current (normal duty), 1520 kW motor power, 18-pulse diode rectifier, floor-standing enclosure, CE EAC.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

ATV6000C190A3333NA3 specifications
ParameterValue
Input type18 pulse diode rectifier bridge
Display type10 inch LCD touch screen multi-language
Connector type2 RJ45 (on the control block) for Ethernet IP/Modbus TCP 1 RJ45 (on the control block) for Modbus serial
Current333 A normal duty 266 A heavy duty
Frequency50 Hz +/- 5 %
IP ratingIP31
Temp storage max50 °C
Temp storage min0 °C
Temp operating max60 °C
Temp operating min1.2 °C
Storage temperature0...50 °C
Pollution degree2 conforming to IEC 61800-5-1
Depth1500 mm
Width4460 mm
Height2687 mm
Operating temperature0...40 °C 40...50 °C with derating factor -25...70 °C during transport

Product details

The Schneider Electric ATV6000C190A3333NA3 is a medium-voltage drive from the Altivar Process ATV6000 range, built around an 18-pulse diode rectifier input and IGBT inverter cells with multilevel PWM output. It is sized for a 1520 kW motor in normal duty or 1220 kW in heavy duty, drawing 333 A or 266 A line current respectively. The drive is supplied in a floor-standing enclosure measuring 4460 mm wide by 2687 mm high by 1500 mm deep.

Supply and input architecture

The 18-pulse diode rectifier keeps input current THDI below 3% per IEEE 519-1992, so no external harmonic filter is needed for most utility compliance. The control circuit accepts 100–240 V AC 47–63 Hz or 120–370 V DC, with a separate 400 V AC supply for the cooling fans. An integrated EMC filter meets IEC 61800-3 category C3 on the control side and C4 on the power side.

Motor and output ratings

Output voltage is limited to the supply voltage level. The drive handles asynchronous, synchronous, and permanent magnet motors. Power losses run 66.1 kW at normal duty and 53.1 kW at heavy duty, so forced convection cooling is mandatory — the enclosure includes dedicated fan supply.

Control and connectivity

A 10-inch LCD touchscreen provides local control in multiple languages. The control block carries two RJ45 ports for Ethernet IP or Modbus TCP, plus one RJ45 for Modbus serial. Slot A accepts fieldbus option cards for Profibus DP V1, PROFINET, DeviceNet, CANopen (RJ45, SUB-D 9, or screw terminals), or EtherCAT. Slot B takes encoder interface modules (5/12 V digital, analog, resolver, or HTL). Eight programmable digital inputs (DI1–DI8, 24 V DC) include two configurable as pulse inputs up to 30 kHz. Analog inputs are configurable for 0–10 V DC or 0–20 mA, 12-bit resolution. Three relay outputs (one NO/NC fault, two NO sequence) and configurable analog outputs (0–10 V DC or 0–20 mA, 10-bit) round out the I/O.

MPN
ATV6000C190A3333NA3