Skip to main content
Schneider Electric ATV6A0C25T4

ATV6A0C25T4 Altivar Process ATV600 250 kW Drive, STO SIL3

MPN ATV6A0C25T4
Active

Schneider Electric Altivar Process ATV600, modular drive, ATV6A0C25T4, 250 kW / 400 hp normal duty, 355 kVA at 480 V, STO SIL3, integrated EMC C3.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

ATV6A0C25T4 specifications
ParameterValue
Main product or component typeVariable speed drive
Current427.0 A 480 V normal duty) 328.0 A 480 V heavy duty)
Horsepower400.0 hp at 480 V normal duty 300.0 hp at 480 V heavy duty
Frequency50...60 Hz - 5...5 %
Temp storage max70 °C
Temp storage min-40 °C
Temp operating max60 °C
Temp operating min1.1 °C
Storage temperature-40...158 °F (-40...70 °C)
Pollution degreePollution degree 2

Product details

The Schneider Electric ATV6A0C25T4 is a modular Altivar Process ATV600 drive rated for 250 kW at 480 V normal duty (400 hp) with an apparent power of 355 kVA and line current of 427 A under normal duty. Heavy-duty rating steps down to 200 kW / 300 hp with 273 kVA and 328 A. That split matters: normal duty covers centrifugal pumps and fans; heavy duty handles conveyors or extruders where overload margin is tighter. The integrated EMC filter meets IEC 61800-3 category C3, which is the standard for industrial environments with conducted emissions limits up to 300 m of motor cable. No external filter needed for most installations inside a factory shed, but verify local network impedance if the drive feeds a shared transformer.

Safe torque off is built in at SIL3 (IEC 61508 / IEC 13849-1). That means two independent channels to disable torque; the drive supports both STOA and STOB 24 V DC inputs with 2.2 kOhm impedance. No separate safety relay card required for single-axis STO — the control unit handles it directly. The control supply splits into three rails: 24 V DC for digital inputs (19...30 V), 10.5 V DC for a reference potentiometer (1 to 10 kOhm), and a separate 24 V DC supply for STO. All three are protected against overload and short circuit to 200 mA.

Compliance paperwork is standard: CE marking, IEC 61800-3, -5-1, -61000-3-12, -60721-3, plus functional safety standards IEC 61508 and IEC 13849-1. The integrated EMC filter is already C3 rated. No separate certification delays for most machine builds.

MPN
ATV6A0C25T4