Skip to main content
Schneider Electric ATV6B0C45T4

Schneider ATV6B0C45T4 Altivar Process ATV600, 450 kW

MPN ATV6B0C45T4
Active

Schneider Electric Altivar Process ATV600 drive, ATV6B0C45T4, modular version, 450 kW normal duty at 480 V, integrated EMC filter C3, STO SIL 3.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

ATV6B0C45T4 specifications
ParameterValue
Main product or component typeVariable speed drive
Current626.0 A 480 V normal duty) 533.0 A 480 V heavy duty)
Horsepower650.0 hp at 480 V normal duty 550.0 hp at 480 V heavy duty
Frequency50...60 Hz - 5...5 %
Temp storage max70 °C
Temp storage min-40 °C
Temp operating max60 °C
Temp operating min1.1 °C
Storage temperature-40...158 °F (-40...70 °C)
Pollution degreePollution degree 2
Data format8 bits, configurable odd, even or no parity Modbus serial
Operating temperature14...104 °F (-10...40 °C) without derating 104...122 °F (40...50 °C) with derating factor

Product details

The ATV6B0C45T4 is a modular Altivar Process ATV600 drive rated for 450 kW normal duty (650 hp) and 355 kW heavy duty at 480 V. It runs both asynchronous and synchronous motors. The integrated EMC filter is rated for Category C3 with up to 300 m (984.3 ft) of motor cable, covering most industrial installations without an external filter. Safe torque off (STO) is SIL 3-rated — any substitution or gray-market unit that breaks the chain of custody invalidates that safety rating.

Lifecycle & compliance — planning letter

Lifecycle status is active (current production). Do not assume that a lower-priced unit from a non-authorized broker carries the same factory calibration or warranty — the safety and EMC compliance (IEC 61800-3, IEC 61508) relies on full manufacturing traceability. The marking listed is CE, and the drive complies with IEC 61800-5-1, IEC 61000-3-12, IEC 60721-3, and IEC 13849-1. If you need a formal Declaration of Conformity or a specific UL file, request it through the authorized channel; it is not included in the bill-of-materials documentation from alternative sources.

Authorized-channel sourcing note

The modular version ships the power module (160 kW) and control unit separately. The front cover and connection kit are supplied separately for field assembly.

Mounting & environment checklist

Cabinet mount with forced-convection cooling. Switching frequency adjustable 2.5–8 kHz with derating; operating altitude to 1000 m without derating then up to 4800 m with derating; pollution degree 2; vibration 0.5 gn at 13–200 Hz; shock 4 gn for 11 ms.

Fieldbus & integration

Modbus serial and Modbus TCP/Ethernet/IP on board. Slot A accepts Profibus DP V1, PROFINET, DeviceNet, CANopen, or I/O extension modules. Transmission rate up to 100 Mbit/s on Ethernet, 38.4 kbit/s on serial. For a new line, commission with the factory-stocked communication module from the same authorized lot to avoid firmware mismatches that can cause bus timeouts.

Current & fault handling

Line current: 626 A at 480 V normal duty, 533 A heavy duty. Prospective line Isc rating 50 kA — adequate for most industrial services. Total harmonic current distortion (THDI) is <5% at full load per IEEE 519. The drive includes protection for motor phase break, ground fault, overvoltage, undervoltage, overspeed, and DC bus overvoltage. For a field swap, confirm the existing line reactor and braking resistor match the DC injection braking method; there is no AC regenerative braking option listed.

MPN
ATV6B0C45T4