Skip to main content
Schneider Electric ATV9B0C25T6

Schneider ATV9B0C25T6 Altivar Process ATV900 Drive, 250 HP a

MPN ATV9B0C25T6
Active

Schneider Electric Altivar Process ATV900, modular VFD, ATV9B0C25T6, 250 hp at 600 V normal duty, 200 hp heavy duty, STO SIL 3.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

ATV9B0C25T6 specifications
ParameterValue
Connector type2 RJ45 Ethernet IP/Modbus TCP on terminal 1 RJ45 Modbus serial on terminal
Main product or component typeVariable speed drive
Current199.0 A 600 V normal duty) 160.0 A 600 V heavy duty) 162.0 A 600 V regenerative mode normal duty) 129.0 A 600 V regenerative mode heavy duty)
Horsepower250.0 hp at 600 V normal duty 200.0 hp at 600 V heavy duty 250.0 hp at 600 V normal duty regenerative mode 200.0 hp at 600 V heavy duty regenerative mode
Frequency50...60 Hz +/- 5 %
Temp storage max70 °C
Temp storage min-40 °C
Temp operating max60 °C
Temp operating min1.2 °C
Storage temperature-40...158 °F (-40...70 °C)
Pollution degreePollution degree 2
Data format8 bits, configurable odd, even or no parity Modbus serial
Operating temperature23...104 °F (-5...40 °C) without derating 104...122 °F (40...50 °C) with derating factor

Product details

Drive ratings and duty selection

The ATV9B0C25T6 is a modular Altivar Process ATV900 drive sized for 250 hp at 600 V normal duty and 200 hp at 600 V heavy duty. Line current at 600 V runs 199 A normal duty, 160 A heavy duty, with regenerative-mode ratings of 162 A and 129 A respectively. Apparent power follows: 207 kVA normal, 166 kVA heavy.

Control supply and safety

Digital inputs and STO take a 24 V DC supply (21...27 V). There is a separate 10.5 V DC reference output for a 1 to 10 kOhm potentiometer, and the external digital input supply is 24 V DC (19...30 V). The STO function is rated SIL 3 — that is a certified safe torque off, not just a software inhibit. If you are wiring a safety relay or PLC safety output, the 24 V DC STO supply must be kept separate from the control logic supply to maintain isolation.

Fieldbus and I/O options

Slot A accepts communication modules for Profibus DP V1, PROFINET, DeviceNet, CANopen (RJ45, SUB-D 9, or screw terminals), or EtherCAT. Slots A, B, and C also take digital/analog I/O extension modules and output relay extension modules. Slot B handles encoder interfaces (5/12 V digital, analog, or resolver). The drive ships with dual RJ45 Ethernet IP/Modbus TCP ports and one RJ45 Modbus serial port; Modbus serial runs RTU at 4.8 to 38.4 kbit/s, 8-bit configurable parity. For a new line, pick the fieldbus card early — the slot assignment determines which options coexist.

EMC and environment

Integrated EMC filter meets IEC 61800-3 category C3 for 300 m cable runs. The drive is cabinet-mount only, rated IP00 for integration into IP21 or IP54 enclosures. Operating altitude is 0 to 2000 m with derating above 1000 m; ambient humidity 5 to 95% non-condensing. Switching frequency is adjustable 2 to 4.9 kHz with derating — lower switching frequency reduces heat and extends cable length, higher reduces motor noise.

MPN
ATV9B0C25T6