Skip to main content
Schneider Electric DF2FGA20

Schneider Electric DF2FGA20 TeSys GS NH000 Fuse, 20A, 690VAC

MPN DF2FGA20
Obsolete

Schneider Electric TeSys GS, DIN cartridge fuse, NH000, aM curve, 690VAC, 20A, set of 3, without striker.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

DF2FGA20 specifications
ParameterValue
Fuse typeDIN
Main product or component typeFuses
Voltage690 V AC
ApplicationProtection

Product details

The DF2FGA20 is a DIN NH000 blade fuse from the TeSys GS range, rated 20 A at 690 V AC with an aM (motor-protection) curve. It comes as a set of three, without striker, and is designed for protection duty in industrial control panels — think motor branch circuits, feeder protection, or general short-circuit backup where the aM characteristic lets it ride through motor inrush without nuisance blowing.

The NH000 fuse size is the physical blade format — it slots into a matching NH000 fuse holder or disconnect switch (like the TeSys GS fuse switch disconnectors). The aM curve means it's a motor-protection fuse: it allows the high inrush current of a motor start (typically 6-8x FLA for a few seconds) without opening, but clears fast on a hard short. At 20 A and 690 V AC, it covers a 3-phase motor load up to roughly 7.5 kW at 400 V or 11 kW at 690 V — but always size to the motor full-load amps, not the fuse rating. The 690 V AC rating gives you headroom on 400 V or 480 V systems; just watch that the voltage rating is AC only, not DC.

Integration note — panel fit and marking

These mount in a standard DIN NH000 fuse holder or switch — no special tooling. The set-of-3 format is typical for 3-phase protection; each fuse is individually replaceable. No striker means no auxiliary contact to signal a blown fuse — if you need blown-fuse indication, you'd need a striker version or an external fuse monitor. The aM curve is printed on the fuse body; keep the packaging label for traceability if your QA process requires it.

MPN
DF2FGA20