The Schneider Electric ENW24165 is an EasyPact NW switch disconnector rated 800 A in AC-23A duty at 690 V AC, 50/60 Hz. Three-pole, drawout mounting, rear-connected. It is designed for distribution applications where you need a visible-break isolation point that can also make and break motor loads or mixed resistive-inductive circuits under load — AC-23A covers switching of motors, transformers, and capacitive loads, not just passive isolation. Rated impulse withstand voltage is 12 kV, and it carries a short-time withstand of 50 kA for 1 s (25 kA for 3 s), with a making capacity of 105 kA peak. That means it can survive a bolted fault on the load side long enough for an upstream breaker to clear — useful when coordinating with a main breaker in a switchboard. Pollution degree 4 per IEC 60664-1 means it is rated for harsh, conductive environments (dust, condensation, partial immersion) — typical in heavy industrial switchgear, not clean-room panels. IP40 enclosure protection keeps out tools and wires but not moisture ingress, so mount it inside a suitable cabinet in wet areas.

Schneider ENW24165 EasyPact NW Switch Disconnector, 800A, 3P
MPN ENW24165
Active
Schneider Electric EasyPact NW switch disconnector, ENW24165, 800 A AC-23A, 3-pole, drawout, rear-connected, 395 mm depth.
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026
Specifications
| Parameter | Value |
|---|---|
| Control type | Push-button |
| Main product or component type | Switch disconnector |
| Voltage | 690 V AC 50/60 Hz conforming to IEC 60947-3 |
| Insulation voltage ui | 1000 V AC 50/60 Hz conforming to IEC 60947-3 |
| Current | AC-23 A: 800 A AC 50/60 Hz 690 V |
| Utilization category | AC-23 A |
| IP rating | IP40 |
| Terminal pitch | 115 mm without spreader |
| Temp storage max | 85 °C |
| Temp storage min | -40 °C |
| Temp operating max | 70 °C |
| Temp operating min | -5 °C |
All specifications
| Parameter | Value |
|---|---|
| Storage temperature | -40...85 °C without control unit |
| Pollution degree | 4 conforming to IEC 60664-1 |
| Depth | 395 mm |
| Width | 441 mm |
| Height | 439 mm |
| Application | Distribution |
| Operating temperature | -5...70 °C |
Product details
ENW24165 Datasheet
MPN
ENW24165