Skip to main content
Schneider Electric ENW24165

Schneider ENW24165 EasyPact NW Switch Disconnector, 800A, 3P

MPN ENW24165
Active

Schneider Electric EasyPact NW switch disconnector, ENW24165, 800 A AC-23A, 3-pole, drawout, rear-connected, 395 mm depth.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

ENW24165 key specifications
ParameterValue
Control typePush-button
Main product or component typeSwitch disconnector
Voltage690 V AC 50/60 Hz conforming to IEC 60947-3
Insulation voltage ui1000 V AC 50/60 Hz conforming to IEC 60947-3
CurrentAC-23 A: 800 A AC 50/60 Hz 690 V
Utilization categoryAC-23 A
IP ratingIP40
Terminal pitch115 mm without spreader
Temp storage max85 °C
Temp storage min-40 °C
Temp operating max70 °C
Temp operating min-5 °C

All specifications

ENW24165 additional specifications
ParameterValue
Storage temperature-40...85 °C without control unit
Pollution degree4 conforming to IEC 60664-1
Depth395 mm
Width441 mm
Height439 mm
ApplicationDistribution
Operating temperature-5...70 °C

Product details

The Schneider Electric ENW24165 is an EasyPact NW switch disconnector rated 800 A in AC-23A duty at 690 V AC, 50/60 Hz. Three-pole, drawout mounting, rear-connected. It is designed for distribution applications where you need a visible-break isolation point that can also make and break motor loads or mixed resistive-inductive circuits under load — AC-23A covers switching of motors, transformers, and capacitive loads, not just passive isolation. Rated impulse withstand voltage is 12 kV, and it carries a short-time withstand of 50 kA for 1 s (25 kA for 3 s), with a making capacity of 105 kA peak. That means it can survive a bolted fault on the load side long enough for an upstream breaker to clear — useful when coordinating with a main breaker in a switchboard. Pollution degree 4 per IEC 60664-1 means it is rated for harsh, conductive environments (dust, condensation, partial immersion) — typical in heavy industrial switchgear, not clean-room panels. IP40 enclosure protection keeps out tools and wires but not moisture ingress, so mount it inside a suitable cabinet in wet areas.

MPN
ENW24165