Skip to main content
Schneider Electric ENW24166

Schneider Electric ENW24166 EasyPact NW Switch Disconnector,

MPN ENW24166
Active

Schneider Electric EasyPact NW switch disconnector, ENW24166, 1000 A AC-23A at 690 V AC, 3 poles, drawout mounting, IP40.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

ENW24166 key specifications
ParameterValue
Control typePush-button
Main product or component typeSwitch disconnector
Voltage690 V AC 50/60 Hz conforming to IEC 60947-3
Insulation voltage ui1000 V AC 50/60 Hz conforming to IEC 60947-3
CurrentAC-23 A: 1000 A AC 50/60 Hz 690 V
Utilization categoryAC-23 A
IP ratingIP40
Terminal pitch115 mm without spreader
Temp storage max85 °C
Temp storage min-40 °C
Temp operating max70 °C
Temp operating min-5 °C

All specifications

ENW24166 additional specifications
ParameterValue
Storage temperature-40...85 °C without control unit
Pollution degree4 conforming to IEC 60664-1
Depth395 mm
Width441 mm
Height439 mm
ApplicationDistribution
Operating temperature-5...70 °C

Product details

Its headline rating is 1000 A in utilisation category AC-23A at 690 V AC — that means it can make and break motor loads, including occasional inrush, up to that current without maintenance, per IEC 60947-3. For isolation duty, the same standard certifies it as a disconnector: the contact position indicator (visible gap) confirms the circuit is dead when open.

Withstand and making capacity — the fault-handling backbone

Rated short-time withstand current (Icw) is 50 kA for 1 second, or 25 kA for 3 seconds, at ambient temperatures up to 70 °C. That 50 kA / 1 s figure governs selectivity coordination with upstream protection — the switch must hold closed through the clearing time of a downstream breaker. The rated short-circuit making capacity (Icm) is 105 kA AC, which is the peak current the switch can close onto without welding contacts. Impulse withstand voltage (Uimp) is 12 kV, matching the insulation coordination for a 1000 V rated insulation voltage (Ui) system.

Mounting and integration — drawout chassis, rear connection

Drawout mounting on a rail, with rear horizontal or vertical connection at a 115 mm pitch without spreader. The drawout feature means the switch chassis can be racked out for maintenance or replacement without disturbing the main bus connections — a standard requirement for switchgear where uptime matters. IP40 enclosure protection keeps tools and fingers out but is not rated for washdown. Mechanical durability is 20,000 cycles with maintenance or 10,000 without; electrical durability for AC-23A is 6,000 cycles at 440 V and 4,000 at 690 V.

MPN
ENW24166