Skip to main content
Schneider Electric ENW24192

Schneider Electric ENW24192 EasyPact NW Switch Disconnector,

MPN ENW24192
Active

Schneider Electric EasyPact NW, switch disconnector, ENW24192, 1600 A AC-23A, 4 poles, fixed mount, IP40.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

ENW24192 key specifications
ParameterValue
Control typePush-button
Main product or component typeSwitch disconnector
Voltage690 V AC 50/60 Hz conforming to IEC 60947-3
Insulation voltage ui1000 V AC 50/60 Hz conforming to IEC 60947-3
CurrentAC-23 A: 1600 A AC 50/60 Hz 690 V
Utilization categoryAC-23 A
IP ratingIP40
Terminal pitch115 mm without spreader
Temp storage max85 °C
Temp storage min-40 °C
Temp operating max70 °C
Temp operating min-5 °C

All specifications

ENW24192 additional specifications
ParameterValue
Storage temperature-40...85 °C without control unit
Pollution degree4 conforming to IEC 60664-1
Depth297 mm
Width537 mm
Height352 mm
ApplicationDistribution
Operating temperature-5...70 °C

Product details

The Schneider Electric ENW24192 is a 4-pole switch disconnector from the EasyPact NW range, rated 1600 A in AC-23A utilisation category at 690 V AC.

The 1600 A continuous rating is the headline number, but the short-time withstand current tells you what it survives in a fault: 50 kA for 1 s or 25 kA for 3 s, both per IEC 60947-3. That's enough to coordinate with most downstream MCCB or fuse protection without the switch becoming the weak link. The making capacity of 105 kA peak means it can close onto a bolted fault — important if you're using it as a load-break switch ahead of a transformer or large drive. Pollution degree 4 is the highest in IEC 60664-1, covering conductive pollution (dust, moisture, carbon) that would track across insulation in a dirty substation or industrial environment. That, plus the 12 kV impulse withstand, tells you this switch is designed for main incoming or distribution positions where the environment is harsh and the fault energy is high.

MPN
ENW24192