Skip to main content
Schneider Electric ENW24268

Schneider Electric ENW24268 EasyPact NW Switch Disconnector,

MPN ENW24268
Active

Schneider Electric EasyPact NW, switch disconnector, ENW24268, 4000 A AC-23A, 4 poles, drawout, 690 V AC, 55 kA Icw.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

ENW24268 key specifications
ParameterValue
Control typePush-button
Main product or component typeSwitch disconnector
Voltage690 V AC 50/60 Hz conforming to IEC 60947-3
Insulation voltage ui1000 V AC 50/60 Hz conforming to IEC 60947-3
CurrentAC-23 A: 4000 A AC 50/60 Hz 690 V
Utilization categoryAC-23 A
IP ratingIP40
Terminal pitch115 mm without spreader
Temp storage max85 °C
Temp storage min-40 °C
Temp operating max70 °C
Temp operating min-5 °C

All specifications

ENW24268 additional specifications
ParameterValue
Storage temperature-40...85 °C without control unit
Pollution degree4 conforming to IEC 60664-1
Depth395 mm
Width556 mm
Height439 mm
Mechanical life cycles20000 cycles with maintenance conforming to IEC 60947-3 10000 cycles without maintenance conforming to IEC 60947-3
ApplicationDistribution
Operating temperature-5...70 °C

Product details

The Schneider Electric ENW24268 is a 4-pole switch disconnector from the EasyPact NW range, rated 4000 A in AC-23A utilisation category at 690 V AC. The short-time withstand current (Icw) is 55 kA for 1 second, or 30 kA for 3 seconds. That's the fault current the switch can carry without welding or damage during the upstream breaker's clearing time. The making capacity (Icm) of 121 kA peak tells you it can close onto a bolted fault — important for coordination studies on high-capacity 400 V or 690 V busbars. The IP40 enclosure keeps tools and fingers out but isn't sealed against water ingress; it's intended for indoor switchgear assemblies, not washdown zones.

Drawout mounting and panel integration

This is a drawout (withdrawal) version — the switch chassis slides out of its cradle for safe inspection or replacement without de-energising the busbars. The mounting support is rail-based, with a connection pitch of 115 mm without spreader. Neutral is on the right. Rear connections, horizontal or vertical orientation. Dimensions: 556 mm wide, 439 mm high, 395 mm deep — plan your cabinet depth accordingly. Electrical durability under AC-23A at 440 V is 5,000 cycles; at 690 V it drops to 2,500 cycles. That's typical for a high-current switch — the arc energy at 690 V wears contacts faster. If your application cycles the switch daily under load, factor that into your maintenance schedule.

MPN
ENW24268