Skip to main content
Schneider Electric FCE200525B200

Schneider Electric FCE200525B200 Motor Cable, 840 W

MPN FCE200525B200
Active

Schneider Electric FCE200525B200 motor cable assembly, three-phase, 12.07 in (306.7 mm) length, 840 W continuous power, 2000 rpm nominal speed, with holding brake and absolute multiturn SinCos Hiperface encoder.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

FCE200525B200 specifications
ParameterValue
Encoder typeAbsolute multiturn SinCos Hiperface
Shaft end typeSmooth shaft
Main product or component typeServo motor
Frequency8 kHz
Length12.07 in (306.7 mm)
Shaft diameter0.7 in (19 mm)
Max axial force fa n160 N
Max radial force fr n790 N 2000 rpm
Centring collar diameter3.3 in (85 mm)

Product details

Motor cable for Lexium servo drives

This FCE200525B200 is a pre-terminated motor cable assembly for Schneider Electric's Lexium 52 and 62 servo drive families, carrying three-phase power at 840 W continuous and 2000 rpm nominal speed. The cable length is 12.07 in (306.7 mm) — a short pigtail meant for tight panel-to-motor routing where excess cable loop is not an option.

Rated 840 W continuous output power with 4 N.m nominal torque at 2000 rpm — this matches the LXM62 and LXM52 drive ratings at 400 V three-phase input. Peak stall torque hits 18.3 N.m at 1900 mA, enough for high-inertia starts or rapid acceleration cycles on a conveyor or spindle axis. The holding brake (6.75 N.m) locks the shaft when power is removed — critical for vertical-axis loads that must not drift during a power loss or E-stop. Absolute multiturn SinCos Hiperface encoder provides position feedback without a home cycle after power-up — saves time on multi-axis machines where each axis must know its absolute position at boot.

Mounting and integration notes

Flange-mounted motor with 100 mm flange size and smooth shaft (19 mm diameter, 40 mm length) — direct fit to standard Lexium motor brackets. IP69K and IP67 motor protection per IEC 60034-5 means the motor body handles high-pressure washdown (IP69K) and temporary immersion (IP67) — suitable for food-and-bev or washdown zones. Cable terminates with stripped ends — no connector on the motor side; you land the wires directly in the drive or junction box. Confirm the terminal block accepts the stripped wire gauge before committing. Natural convection cooling — no fan, so the motor relies on its own surface area and the machine frame for heat rejection. Derate if mounted in a confined space with restricted airflow.

MPN
FCE200525B200