Skip to main content
Schneider Electric ILM0701P12F0000

Schneider ILM0701P12F0000 PacDrive 3 ILM servo motor, 310 W

MPN ILM0701P12F0000
Active

Schneider Electric PacDrive 3 ILM servo motor integrated drive, 0.5 N.m nominal torque, 3.5 N.m peak stall, 6000 rpm, 70 mm flange, IP54, keyed shaft.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

ILM0701P12F0000 specifications
ParameterValue
Feedback typeAbsolute multiturn SinCos Hiperface
Shaft end typeKeyed
Main product or component typeServo motor integrated drive
IP ratingIP54
Length8.6 in (219 mm)
Shaft diameter0.4 in (11 mm)
Max axial force fa n0.2 x Fr
Max radial force fr n660 N 1000 rpm 520 N 2000 rpm 460 N 3000 rpm 410 N 4000 rpm 380 N 5000 rpm 360 N 6000 rpm
Centring collar diameter2.4 in (60 mm)

Product details

PacDrive 3 ILM in one paragraph

The ILM0701P12F0000: The Schneider Electric PacDrive 3 ILM servo motor integrated drive pairs a 0.5 N.m continuous-rated rotor with an integrated drive stage on a 70 mm flange, with 0.5 N.m nominal torque and a 3.5 N.m peak stall torque to absorb the inertial bursts of a sizing step without saturating the inverter (cites:,). 310 W of nominal output power at a 0.6 A line-rated current keeps the motor inside the natural-convection thermal envelope; forced-air assist is not specified because the housing relies on surface cooling alone (cites:,).

Torque, current, and the headroom for sizing

Continuous stall torque sits at 1.1 N.m against 0.5 N.m nominal at speed — the nominal-rating figure reflects what the rotor delivers in the operating envelope, while the continuous-stall ceiling is the absolute torque limit before thermal foldback (cites:,). Peak stall torque of 3.5 N.m is the short-duration margin the integrated drive can ask for during acceleration transients; sizing the mechanical system against peak rather than nominal avoids nuisance trips on every index move (cites:). Maximum Irms of 5.7 A versus a continuous 1.55 A stall current shows the same pattern: roughly 3.6× peak-to-continuous headroom for transient current demand (cites:,). Nominal speed of 6000 rpm is the published design point; the back-EMF constant of 46 V/krpm at 20 °C means the drive approaches its bus-voltage ceiling near top speed, which matters when the machine spends long stretches at rated rpm (cites:,).

Mechanical fit and shaft loading

The 70 mm flange, 60 mm centering collar with 2.5 mm depth, and four 5.5 mm mounting holes follow the IEC standard-flange pattern, so the motor drops into machine frames designed around the ILM family without adapter plates (cites:,). Overall length of 219 mm and a keyed 11 mm shaft with 23 mm engagement and 18 mm key width determine the pulley, pinion, or coupling selection — the key dimensions match the part drawing exactly (cites:,). Maximum radial force Fr drops from 660 N at 1000 rpm to 360 N at 6000 rpm, so a belt or gear train preloaded close to the low-speed limit will exceed the shaft-bearing envelope as the line ramps to top speed (cites:). Maximum axial Fa is constrained to 0.2 × Fr, the typical rule-of-thumb guard against preload from the driven load stacking axial force on the front bearing (cites:).

Feedback, brake, and what ships in the box

Absolute multiturn SinCos Hiperface feedback means the axis keeps its position reference through power cycles — no homing routine on every restart, which matters on a PacDrive 3 line where cycle-time loss is line-throughput loss (cites:). A holding brake is fitted and rated at 3 N.m holding torque, sized to park the axis in power-loss conditions rather than to brake a moving load — the brake envelope and the continuous-torque envelope are separate design limits (cites:,). Natural-convection cooling means no fan cable and no fan-failure mode; IP54 on the housing keeps the motor safe from dust ingress and water spray from any direction, but does not qualify it for direct washdown duty (cites:,). Six-pole rotor with one motor stack gives the inductance and resistance values that determine the current-loop bandwidth: 10.4 Ω phase-to-phase at 20 °C rises to 7.23 Ω phase-to-neutral at 120 °C, and stator inductance follows the same temperature dependency (cites:,).

MPN
ILM0701P12F0000