Skip to main content
Schneider Electric ILM1001P22F0000

ILM1001P22F0000 Schneider PacDrive 3 Servo Motor, 600 W

MPN ILM1001P22F0000
Obsolete

Schneider Electric PacDrive 3 ILM series integrated servo motor, 600 W nominal, 1.9 N·m nominal torque, 3000 rpm, IP65, SinCos Hiperface multiturn feedback, integrated holding brake.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

ILM1001P22F0000 specifications
ParameterValue
Feedback typeAbsolute multiturn SinCos Hiperface
Shaft end typeUntapped
Main product or component typeServo motor integrated drive
IP ratingIP65
Length9.6 in (243 mm)
Shaft diameter0.7 in (19 mm)
Max axial force fa n0.2 x Fr
Max radial force fr n900 N 1000 rpm 720 N 2000 rpm 630 N 3000 rpm
Centring collar diameter3.7 in (95 mm)

Product details

What this motor is, and what the headline numbers buy you

The ILM1001P22F0000 is a Schneider Electric PacDrive 3 ILM-series integrated servo motor — drive and motor in one unit — sized for 600 W of continuous mechanical output at 1.9 N·m nominal torque up to 3000 rpm, so it fits mid-range indexing and conveyor axes where a separate servo amplifier would only add panel space. The integrated-drive format collapses the amplifier chassis into the motor housing, so cabling reduces to a hybrid cable for power and a single-bus connection to the PacDrive controller; the motor flange (100 mm, international standard pattern) bolts to the gearbox or coupling in the standard footprint.

Loop tuning — electrical constants the drive needs

The torque constant of 1.39 N·m/A at 120 °C gives the current-loop gain its slope: at the 1.4 A line-rated current the motor is delivering roughly the published 1.9 N·m nominal torque figure, while the 7.4 A Irms ceiling (cited) covers intermittent acceleration into the 9.6 N·m peak-stall envelope before the I²t margin closes. Stator resistance and inductance are quoted both cold and hot (9.8 Ω at 20 °C dropping to 6.82 Ω at 120 °C; 45.7 mH at 20 °C Ph/Ph against 22.85 mH at 120 °C Ph/N), which is the pair the controller's auto-tune routine relies on for a clean current loop — warm them up before any final Kp/Ki trim or the resistance term will lie. Back-EMF constant of 90 V/krpm sets the upper speed limit: above 3000 rpm the induced EMF on a 400 V-class DC bus closes in on the bus voltage, which is why the rating plate stops at 3000 rpm.

Mechanical integration into the axis

Shaft is 19 mm diameter over a 40 mm length with a 30 mm keyway and untapped end, matched to common flexible couplings for that bore size; the four-hole international-standard flange at 100 mm with a 95 mm centring collar aligns the motor to the gearbox or pillow-block without a sleeve adapter. Radial shaft load is the more demanding figure on a belt or pinion-shaft axis: 900 N at 1000 rpm, 720 N at 2000 rpm, and 630 N at 3000 rpm — derate from the 1000 rpm baseline when the pulley sits further from the face or runs through a speed increaser. The axial limit is 0.2 × Fr, so the thrust bearing on a vertical axis should not carry the full Fr figure.

Environment, feedback, and the holding brake

The ILM1001P22F0000 is sealed to IP65 with natural-convection cooling — no fan to fail in a dusty packaging environment, but derate inside a fully sealed cabinet where the motor's own heat has nowhere to go. Feedback is absolute multiturn SinCos Hiperface, so absolute position survives a power cycle without a home-return routine at every cold start; the integrated holding brake rated 5.5 N·m of static hold lets the axis hold position with the bus off, which matters on a vertical or incline axis where the controller goes into safe-torque-off.

Sourcing posture

Single-unit package quantity applies; panel-build or machine-build volumes confirm pricing breaks at quote time. No stock-holding or ships-from inventory claim is made on this listing.

MPN
ILM1001P22F0000