Skip to main content
Schneider Electric ILM1001P32F0000

ILM1001P32F0000 Schneider PacDrive 3 ILM Servo, 600 W

MPN ILM1001P32F0000
Obsolete

Schneider Electric PacDrive 3 ILM series integrated servo motor, 600 W nominal, 1.9 N·m nominal torque, IP65, keyed shaft, Hiperface feedback.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

ILM1001P32F0000 specifications
ParameterValue
Feedback typeAbsolute multiturn SinCos Hiperface
Shaft end typeKeyed
Main product or component typeServo motor integrated drive
IP ratingIP65
Length9.6 in (243 mm)
Shaft diameter0.7 in (19 mm)
Max axial force fa n0.2 x Fr
Max radial force fr n900 N 1000 rpm 720 N 2000 rpm 630 N 3000 rpm
Centring collar diameter3.7 in (95 mm)

Product details

Fit on a PacDrive 3 axis

The Schneider Electric ILM1001P32F0000 is an ILM-series servo motor with integrated drive from the PacDrive 3 range — a single-cable axis block sized for 600 W nominal output at 1.4 A line current, with peak Irms of 7.4 A for acceleration bursts.

Holding brake and feedback for safety-rated axes

A 5.5 N·m holding brake is fitted as standard, paired with absolute multiturn SinCos Hiperface feedback — the brake locks the axis on de-energise and the Hiperface channel returns absolute position without a homing move on power-up, which is the usual requirement on guarded machine axes where uncontrolled drop on E-stop must be avoided. Continuous stall torque is rated at 2.5 N·m against 1.8 A continuous stall current — the difference between the continuous stall figure and the 1.9 N·m nominal at 3000 rpm is the thermal envelope a sizing engineer has to respect at zero speed, particularly when the brake is engaged and convection alone is shedding heat.

Mounting, sealing, and shaft-side loads

The motor mounts on an international standard flange with a 100 mm flange size and a 95 mm centring collar; four 9 mm mounting holes fix it through the machine frame, and the keyed shaft (19 mm diameter, 40 mm length, 30 mm key) drives the load without a second shaft end — for a typical gearbox or coupling fit, the radial load budget derates from 900 N at 1000 rpm to 630 N at 3000 rpm, with axial load capped at 0.2 × Fr. IP65 sealing on the housing supports washdown-adjacent deployment on packaging and food-grade lines, and natural convection cooling removes the need for an external fan — there is no fan cable to route and no fan-failure mode to monitor in the cabinet thermal budget.

Electrical constants the drive has to match

Stator resistance is 9.8 Ω phase-to-phase at 20 °C and back-EMF is 90 V/krpm — the PacDrive 3 drive has to be configured for those constants or the current loop will mis-tune, and the 8-pole / 1-stack winding with 45.7 mH inductance (Ph/Ph at 20 °C) sets the achievable current-loop bandwidth.

MPN
ILM1001P32F0000