Skip to main content
Schneider Electric ILM1003P12F0000

Schneider Electric ILM1003P12F0000 Servo Motor, 1100 W

MPN ILM1003P12F0000
Active

Schneider Electric PacDrive 3 ILM servo motor, 1100 W nominal, 3.5 N·m nominal torque, Hiperface multiturn feedback, integrated drive, flange mount, ILM1003P12F0000.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

ILM1003P12F0000 specifications
ParameterValue
Feedback typeAbsolute multiturn SinCos Hiperface
Shaft end typeKeyed
Main product or component typeServo motor integrated drive
IP ratingIP54
Length12.4 in (315 mm)
Shaft diameter0.7 in (19 mm)
Max axial force fa n0.2 x Fr
Max radial force fr n1050 N 1000 rpm 830 N 2000 rpm 730 N 3000 rpm
Centring collar diameter3.7 in (95 mm)

Product details

What lands on the bench when the crate opens

The ILM1003P12F0000 is a PacDrive 3 ILM-series integrated servo motor — the drive electronics sit inside the motor housing rather than in a separate cabinet, so the unit that arrives is a single flange-mounted assembly rather than a motor-and-drive pair.

Torque, speed, and the working envelope

Nominal output is 1100 W with 3.5 N·m of continuous nominal torque at 2.4 A line current; the continuous stall torque rises to 5.8 N·m at 3.6 A, and peak stall reaches 28.3 N·m for short dynamic moves, so the motor covers both steady holding duties and the accel/decel bursts that PacDrive packaging and converting lines demand. Nominal speed is 3000 rpm with a torque constant of 1.61 N·m/A at the 120 °C winding reference, and maximum Irms is 21.2 A — the figure that bounds the short-duration current the drive will command during a fast index.

Feedback, shaft, and brake

Position feedback is absolute multiturn SinCos Hiperface, so the controller knows absolute shaft position at power-on without a homing move — useful on a PacDrive machine where the reference datum must survive a power cycle. The shaft is keyed (19 mm diameter, 40 mm length, 30 mm key width) with no second shaft end, and the motor carries an integrated holding brake rated 9 N·m — sized to hold the load stationary when the servo is de-energised.

Back-EMF, inductance, and what the drive sees

Back-EMF constant is 103 V/krpm at 20 °C and stator resistance drops from 2.6 Ω phase-to-phase at 20 °C to 1.81 Ω phase-to-neutral at 120 °C — the figure that matters for I²R loss budgeting in the panel thermal envelope. Stator inductance is 15.6 mH phase-to-phase at 20 °C and 7.8 mH phase-to-neutral at 120 °C, the values the drive's current loop uses to set the switching performance.

Mounting, shaft loads, and the cabinet environment

Mounting is an international-standard flange (100 mm flange, 95 mm centring collar, 3.5 mm depth) with four 9 mm mounting holes, so the motor drops onto the standard machine footprint without an adapter plate. Shaft load limits are 1050 N radial at 1000 rpm, falling to 830 N at 2000 rpm and 730 N at 3000 rpm, with axial Fa limited to 0.2 × Fr — the values the mechanical designer uses when sizing a belt, pinion, or coupling on the output end. Cooling is natural convection and ingress protection is IP54, so the housing is sealed against dust and splash but not pressurised washdown — the cabinet or machine enclosure must keep the installation out of direct water jets.

MPN
ILM1003P12F0000