Skip to main content
Schneider Electric ILM1402P31F0000

Schneider ILM1402P31F0000 Servo Motor, 9.1 N.m, 1910 W

MPN ILM1402P31F0000
Active

Schneider Electric PacDrive 3 ILM integrated servo motor, 9.1 N.m nominal torque, 1910 W output, IP65 flange-mount, Hiperface feedback, with holding brake.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

ILM1402P31F0000 specifications
ParameterValue
Shaft end typeKeyed
Main product or component typeServo motor integrated drive
IP ratingIP65
Length13.7 in (347 mm)
Shaft diameter0.9 in (24 mm)
Max axial force fa n0.2 x Fr
Max radial force fr n2430 N 1000 rpm 1930 N 2000 rpm
Centring collar diameter5.1 in (130 mm)

Product details

Match the motor envelope to the motion axis

ILM1402P31F0000 is a Schneider Electric PacDrive 3 ILM integrated servo motor — the drive is housed on the back of the machine, so a single part number ships a complete axis instead of a separate amplifier-and-motor pair. Continuous torque is 9.1 N.m with a 55 N.m peak stall ceiling and 1910 W nominal output; for a sizing pass, the continuous figure — not the peak — is the number that has to clear the RMS load over the duty cycle, because the peak is only reachable inside the short-term overload window.

Sizing the winding against the supply and the load

Nominal current is 3.7 A with a 24 A Irms peak at 80.5 lbf.in continuous; the 2.6 N.m/A torque constant means a 9.1 N.m continuous shaft load sits at roughly 3.5 A on the winding — well inside the 3.7 A nominal envelope. Stator resistance is 1.9 Ohm phase-to-phase at 20 °C with 22 mH phase-to-phase inductance; with a 173 V/krpm back-EMF constant, the motor reaches its 2000 rpm nominal speed at around 346 V of applied DC bus — a number worth eyeballing if the axis is being retrofitted onto a non-PacDrive amplifier.

Feedback, brake, and the panel-side wiring

Absolute single-turn SinCos Hiperface feedback gives absolute position on power-up without a homing move — a real time-saver on changeover if the line restarts cold; the integrated holding brake adds 23 N.m of static holding, which needs to be released through the drive's dedicated brake output before any attempt to jog the axis. Natural-convection cooling on a 140 mm flange with IP65 sealing means the motor breathes through its housing only — a clean mounting surface and an unobstructed body are required for the rated continuous torque, and the IP65 rating covers splash and dust ingress in a packaged-foods washdown zone but not submersion. The keyed 24 mm shaft with a 50 mm length and the keyed-only second shaft omitted from the catalogue designation — single-shaft end is the production line with no opposite-side extension to balance against; the 140 mm flange with 4 x 11 mm mounting holes on a 130 mm centring collar drops onto a standard IEC mounting footprint.

Lifecycle status and the BOM line

Body length is 13.7 in (347 mm) on a 1.6 in (40 mm) body width; cabinet depth needs to be cleared against this before the panel is laid out — and any cabinet retrofit from a previous ILM frame should be checked against the 347 mm figure rather than assumed onto the older ILM1401 / ILM1403 length footprint.

MPN
ILM1402P31F0000