Skip to main content
Schneider Electric LG1K065P707

Schneider LG1K065P707 TeSys LG Enclosed DOL Starter

MPN LG1K065P707
Obsolete

Schneider TeSys LG enclosed DOL starter, LG1K065P707, 1.6-2.5 A thermal protection, 230 V AC coil, IP55 polycarbonate enclosure, includes contactor, circuit breaker, and pushbuttons.

$396.14 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

LG1K065P707 specifications
ParameterValue
Main product or component typeEnclosed DOL starter
Coil voltage230 V AC 50/60 Hz
Utilization categoryAC-3
IP ratingIP55
Depth165 mm
Width175 mm
Height165 mm
MaterialPolycarbonate
ApplicationSafety
Thermal protection adjustment range1.6–2.5 A

Product details

What this enclosed starter packs

The Schneider LG1K065P707 is a TeSys LG enclosed direct-on-line starter rated for motor loads from 0.37 kW at 220/230 V AC up to 1.1 kW at 440 V AC, all in AC-3 duty. The 1.6 to 2.5 A thermal protection adjustment range means you set the overload relay to match the motor full-load current within that window — no separate overload block to buy. Inside the IP55 polycarbonate enclosure (165 mm deep, 175 mm wide, 165 mm high) lives a contactor, a switch disconnector, and a circuit-breaker — three devices in one box. Cable entries are 4 Pg 13 plus 2 Pg 16 at both top and bottom, enough for motor and control wiring without extra glands. IK07 impact rating means the enclosure handles light mechanical knocks on the factory floor.

Safety and standards compliance

Rated for safety applications per IEC 60204-1 (electrical equipment of machines) and IEC 60947-4-1 (contactors and motor-starters). The emergency stop pushbutton and rotary handle are integrated into the enclosure lid — no field wiring of a separate E-stop required. For a guarding circuit or hazard-zone isolation, this unit provides a single-box solution that meets the standard's disconnection and overload protection requirements.

MPN
LG1K065P707