What this enclosed starter packs
The Schneider LG1K065P707 is a TeSys LG enclosed direct-on-line starter rated for motor loads from 0.37 kW at 220/230 V AC up to 1.1 kW at 440 V AC, all in AC-3 duty. The 1.6 to 2.5 A thermal protection adjustment range means you set the overload relay to match the motor full-load current within that window — no separate overload block to buy. Inside the IP55 polycarbonate enclosure (165 mm deep, 175 mm wide, 165 mm high) lives a contactor, a switch disconnector, and a circuit-breaker — three devices in one box. Cable entries are 4 Pg 13 plus 2 Pg 16 at both top and bottom, enough for motor and control wiring without extra glands. IK07 impact rating means the enclosure handles light mechanical knocks on the factory floor.
Safety and standards compliance
Rated for safety applications per IEC 60204-1 (electrical equipment of machines) and IEC 60947-4-1 (contactors and motor-starters). The emergency stop pushbutton and rotary handle are integrated into the enclosure lid — no field wiring of a separate E-stop required. For a guarding circuit or hazard-zone isolation, this unit provides a single-box solution that meets the standard's disconnection and overload protection requirements.