Skip to main content
Schneider Electric LX0FH020

TeSys LX0FH020 Contactor Coil, 208 V AC/DC, Active

MPN LX0FH020
Active

Schneider Electric TeSys F contactor coil, LX0FH020, 208 V AC/DC, AC 50-400 Hz or DC control circuit, 1 Mcycles mechanical durability.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

LX0FH020 specifications
ParameterValue
Control circuit typeAC 50...400 Hz DC standard
Main product or component typeContactor coil
Coil voltage208 V AC 50...400 Hz 208 V DC
Mechanical life cycles1 Mcycles
Operating time50...100 ms unlatching 45...50 ms latching

Product details

The LX0FH020 is a replacement coil for TeSys F contactors, rated for 208 V AC (50-400 Hz) or 208 V DC control circuits. It's the part you swap when the old coil opens up or the insulation goes brittle on a hot motor starter.

Rated 1 million mechanical cycles — that's the life before the armature or spring wears out, not the electrical switching life which depends on the contactor's load. At 104 °F (40 °C) the maximum operating rate is 120 cycles per hour, so it'll keep up with a cycling conveyor or pump start-stop but not a high-speed pick-and-place. Coil resistance runs 20.2 Ω latching and 2654 Ω unlatching at 68 °F (20 °C). That wide spread tells you it's a two-winding coil — one winding pulls in, the other holds, which cuts holding power and heat.

MPN
LX0FH020