Skip to main content
Schneider Electric LX0FH056

TeSys LX0FH056 Contactor Coil, 110 V DC, Low Consumption

MPN LX0FH056
Obsolete

TeSys F, contactor coil, LX0FH056, 110 V DC low consumption.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

LX0FH056 specifications
ParameterValue
Control circuit typeDC low consumption
Main product or component typeContactor coil
Coil voltage110 V DC
Mechanical life cycles1 Mcycles
Operating time50...100 ms unlatching 45...50 ms latching

Product details

The LX0FH056 is a DC low-consumption contactor coil from the TeSys F range, designed to replace or populate the coil on a TeSys F contactor frame. It runs on 110 V DC control voltage, with latching and unlatching voltage limits of 0.85...1.1 Uc — meaning the coil holds in reliably down to about 93.5 V DC and picks up at the same threshold, so a sagging DC bus won't drop it prematurely. Operating time is 50...100 ms for unlatching and 45...50 ms for latching — a tight window that matters when the contactor is part of a sequenced start or safety circuit where timing coordination with other devices is critical. The coil resistance at 20 °C is 25 Ω latching and 364.61 Ω unlatching; that difference is normal for a DC economizer circuit that cuts power after pickup to reduce holding losses. Rated for 1 Mcycles mechanical durability and a maximum operating rate of 120 cycles per hour at 40 °C, so it handles frequent cycling in a conveyor or packaging line without derating. The DC low-consumption design keeps the control transformer and wiring smaller than a standard DC coil would demand.

Mounts directly onto the TeSys F contactor base; no adapter or bracket required. The DC low-consumption circuit means the coil draw is low enough that a 24 V DC supply with a DC-DC boost converter or a dedicated 110 V DC supply can feed it without oversizing. Keep the wiring run short — the 364.61 Ω unlatching resistance limits inrush, but long cable runs add capacitance that can cause false pickup on a noisy DC rail.

MPN
LX0FH056