Skip to main content
Schneider Electric LX0FH060

Schneider LX0FH060 TeSys F Contactor Coil, 230/110 V AC/DC

MPN LX0FH060
Active

Schneider Electric TeSys F contactor coil, LX0FH060, 230/110 V AC/DC control circuit, 50-100 ms unlatching time.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

LX0FH060 specifications
ParameterValue
Control circuit typeAC/DC at 40...400 Hz
Main product or component typeContactor coil
Coil voltage230 V AC/DC 40...400 Hz 110 V AC/DC 40...400 Hz
Mechanical life cycles1 Mcycles
Operating time50...100 ms unlatching 45...50 ms latching

Product details

What this coil is and what it drives

The LX0FH060 is a replacement or spare coil for the TeSys F contactor range, designed to pull in and hold the contactor's main power poles. It accepts dual control voltages — 230 V AC/DC or 110 V AC/DC — across 40 to 400 Hz, so it covers both 50 Hz and 60 Hz line supplies without a separate tap change.

Timing and pull-in margins

Unlatching (opening the main contacts) takes 50 to 100 ms; latching (closing) takes 45 to 50 ms. That spread matters when coordinating with upstream protection or sequencing multiple contactors — the unlatching window is wider, so expect a slightly longer arc-extinction time on dropout. The coil holds reliably between 0.85 and 1.1 times the rated control voltage for both latching and unlatching. If your control bus sags below 85 % of nominal, the contactor may drop out or fail to pick up — check your supply regulation against that margin.

Duty cycle and mechanical life

That's typical for a general-purpose contactor coil — fine for conveyor starts, pump cycling, or HVAC compressor runs. If your application exceeds 120 ops/h, the coil temperature will climb and you'll need to derate or step up to a larger frame.

Coil resistance — a diagnostic number

The latching winding measures 29.65 Ω at 20 °C; the unlatching winding measures 576 Ω at 20 °C. If you're troubleshooting a contactor that won't hold in, a resistance check against these values tells you whether the coil is open, shorted, or within spec before you pull the contactor out of the panel.

MPN
LX0FH060