Skip to main content
Schneider Electric LX1FF264

TeSys LX1FF264 Contactor Coil, 264 V AC 50 Hz, Obsolete

MPN LX1FF264
Obsolete

TeSys F series, LX1FF264, contactor coil, 264 V AC 50 Hz, 50 Hz AC coil, obsolete.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

LX1FF264 specifications
ParameterValue
Control circuit typeAC 50 Hz
Main product or component typeContactor coil
Coil voltage264 V AC 50 Hz
Temp operating max55 °C
Temp operating min-5 °C
Mechanical life cycles10 Mcycles
Operating time23...35 ms closing 5...15 ms opening
Operating temperature23...131 °F (-5...55 °C)

Product details

The LX1FF264 is a replacement coil for TeSys F contactors, wound for 264 V AC at 50 Hz. It is a bare coil — no built-in suppressor module, so you add your own RC snubber or varistor across the terminals if the application demands it. Coil resistance measures 37.5 Ohm at 68 °F (20 °C); inrush power hits 550 VA at 50 Hz (cos φ 0.3), dropping to 45 VA holding. That 12-to-1 inrush-to-hold ratio is typical for an AC coil — the control transformer feeding it needs to handle the pick-up surge without drooping below 0.85 Uc. Closing time spans 23 to 35 ms; opening is faster at 5 to 15 ms.

For a BOM that needs this exact 264 V AC 50 Hz coil, the procurement path is a last-time-buy or a verified cross-reference from the TeSys F family.

Integration notes

Heat dissipation runs 12 to 16 W at 50 Hz — enough to matter inside a sealed enclosure. The coil sits on the TeSys F contactor frame; verify the mechanical interlock and auxiliary contact stack clear the coil profile before panel assembly. Drop-out threshold is 0.35 to 0.55 Uc at 131 °F (55 °C); operational range is 0.85 to 1.1 Uc. If the control transformer is shared with other AC coils, sequence the pick-up to avoid a cumulative voltage sag that keeps this coil from sealing.

MPN
LX1FF264