Skip to main content
Schneider Electric LX1FG140

Schneider LX1FG140 TeSys F Contactor Coil, 140 V AC 50 Hz

MPN LX1FG140
Obsolete

Schneider Electric TeSys F series, LX1FG140, contactor coil, 140 V AC 50 Hz, 805 VA inrush, 55 VA hold.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

LX1FG140 specifications
ParameterValue
Control circuit typeAC 50 Hz
Main product or component typeContactor coil
Coil voltage140 V AC 50 Hz
Temp operating max55 °C
Temp operating min-5 °C
Mechanical life cycles10 Mcycles
Operating time20...35 ms closing 7...15 ms opening
Operating temperature23...131 °F (-5...55 °C)

Product details

The LX1FG140 is a replacement contactor coil from the TeSys F range, designed for 140 V AC 50 Hz control circuits. It pulls 805 VA inrush and holds at 55 VA, both at 50 Hz with a cos phi of 0.3. The coil has no built-in suppressor module, so you'll need to add one externally if your circuit requires it.

Closing time runs 20 to 35 ms, opening 7 to 15 ms — fast enough for standard motor starting but not for high-speed reversing applications where you'd want a DC coil. The coil dissipates 18 to 24 W at 50 Hz, which matters for panel heat buildup if you're grouping several contactors in a small enclosure. That's about 40 operations a minute — fine for a conveyor or pump cycle, but you'll hit the thermal limit if you're trying to jog a motor faster than that. The coil resistance is 6.67 ohms at 20 °C, and the closed-circuit inductance is 1.05 H. Drop-out voltage is 0.35 to 0.55 Uc at 55 °C, meaning the contactor will drop out somewhere between 49 and 77 V AC — useful to know if you're on a long cable run with voltage drop.

Deployment context

This coil snaps into a TeSys F contactor frame on a DIN rail. The 140 V AC 50 Hz control voltage is common in European panel designs, but verify your control transformer taps — a 120 V tap won't hold this coil reliably at the low end of the operational range (0.85 Uc = 119 V).

MPN
LX1FG140