Skip to main content
Schneider Electric LX1FH10002

TeSys LX1FH10002 Contactor Coil, 1000 V AC 40-400 Hz

MPN LX1FH10002
Active

TeSys F, contactor coil, LX1FH10002, 1000 V AC 40...400 Hz, 650 VA inrush, 10 VA holding, without built-in suppressor module.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

LX1FH10002 specifications
ParameterValue
Control circuit typeAC 40...400 Hz
Main product or component typeContactor coil
Coil voltage1000 V AC 40...400 Hz
Temp operating max55 °C
Temp operating min-5 °C
Mechanical life cycles10 Mcycles
Operating time100...170 ms closing 40...65 ms opening
Operating temperature23...131 °F (-5...55 °C)

Product details

Coil for TeSys F contactors — 1000 V AC control

The LX1FH10002 is a replacement coil for TeSys F contactors, rated for a 1000 V AC control circuit at 40...400 Hz. It draws 650 VA inrush (cos φ 0.9 at 20 °C) and settles to 10 VA holding (cos φ 0.3). No built-in suppressor module — plan external RC snubber or varistor across the coil if driving from a PLC or solid-state output, or the switching transient may couple noise into the control wiring.

Timing and duty cycle

Closing time spans 100...170 ms; opening takes 40...65 ms. Drop-out threshold is 0.35...0.55 Uc; pick-up requires 0.85...1.1 Uc at 55 °C. If your control supply sags under load, the coil may chatter before fully dropping out — check your transformer sizing against the 650 VA inrush peak.

Thermal and sourcing

Confirm the mating contactor frame (TeSys F) and the coil voltage before committing the BOM line — this is the 1000 V AC variant, not the more common 110...480 V coils in the same LX1FH family.

MPN
LX1FH10002