Skip to main content
Schneider Electric LX1FH11062

Schneider Electric LX1FH11062 TeSys contactor coil, 100-110

MPN LX1FH11062
Obsolete

Schneider Electric TeSys LX1FH11062 contactor coil, 100 V AC 50 Hz / 100-110 V AC 60 Hz, 8 W dissipation, without built-in suppressor module.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

LX1FH11062 specifications
ParameterValue
Control circuit typeAC 50/60 Hz
Main product or component typeContactor coil
Coil voltage100 V AC 50 Hz 100...110 V AC 60 Hz
Temp operating max55 °C
Temp operating min-5 °C
Operating time100...170 ms opening 40...65 ms closing
Operating temperature23...131 °F (-5...55 °C)

Product details

The LX1FH11062 is a TeSys-series contactor coil — a replacement or spare coil for TeSys F contactors that take a 100 V AC 50 Hz or 100-110 V AC 60 Hz control voltage. It is rated for continuous duty and dissipates 8 W across the 40-400 Hz range, which is the heat the contactor's enclosure must shed. The coil has no built-in suppressor module, so if your circuit requires one (for example, to reduce switching transients on a PLC output), you add an external RC snubber or varistor across the coil terminals.

Voltage tolerance and timing

The coil picks up between 85% and 110% of rated control voltage (Uc) at 55 °C, and drops out between 35% and 55% of Uc. That means on a nominal 100 V AC supply, the contactor stays closed down to about 85 V and releases somewhere between 35 V and 55 V — a wide dropout band that accommodates brownout conditions without nuisance drop-out. Opening time is 100-170 ms; closing time is 40-65 ms. Maximum operating rate is 2400 cycles per hour at 55 °C, which is about 40 operations per minute — fine for most motor starting or resistive load switching, but not for high-speed jogging or rapid cycling.

MPN
LX1FH11062