Skip to main content
Schneider Electric LX1FK350

Schneider LX1FK350 TeSys Contactor Coil, 350 V AC

MPN LX1FK350
Obsolete

Schneider Electric TeSys LX1F series, LX1FK350, contactor coil, 350 V AC 50/60 Hz, without built-in suppressor module.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

LX1FK350 specifications
ParameterValue
Control circuit typeAC 50/60 Hz
Main product or component typeContactor coil
Coil voltage350 V AC 50/60 Hz
Temp operating max55 °C
Temp operating min-5 °C
Mechanical life cycles10 Mcycles
Operating time100...170 ms opening 40...75 ms closing
Operating temperature23...131 °F (-5...55 °C)

Product details

The LX1FK350 is a replacement coil for Schneider TeSys LX1F contactors, rated 350 V AC 50/60 Hz. It's the part that pulls the contactor in — no built-in suppressor module, so you supply your own RC snubber or varistor across the coil terminals if the application needs one. Coil resistance tells you the draw: 89.6 Ω inrush at 68 °F (20 °C) drops to 2410 Ω holding at the same temperature. That inrush-to-hold ratio is typical for AC-operated contactor coils — the high initial current slams the armature home, then the holding current drops to a fraction of that. Operating window is 100...170 ms opening, 40...75 ms closing. That's the mechanical travel time; add the control system's scan or relay delay when timing a safety circuit.

Voltage tolerance and dropout behaviour

Control circuit voltage limits are 0.85...1.1 Uc for operation at 131 °F (55 °C), meaning the coil must see between about 298 V and 385 V to pull in reliably. Dropout happens between 0.3 and 0.5 Uc — roughly 105 V to 175 V — so the contactor drops out cleanly on a brownout without chattering.

Listed as Active by Schneider. This is a current-production coil, not a last-time-buy or NRND part.

Durability and rate limits

Rated for 10 Mcycles mechanical — that's the coil and contactor mechanism together, not just the coil. Maximum operating rate is 2400 cycles per hour at 131 °F (55 °C), which works out to one operation every 1.5 seconds. Keep the ambient within -5...55 °C for rated life.

MPN
LX1FK350