Skip to main content
Schneider Electric LX1FX048

Schneider TeSys LX1FX048 Contactor Coil, 48 V AC 50/60 Hz

MPN LX1FX048
Obsolete

Schneider Electric TeSys LX1FX048, 48 V AC 50/60 Hz contactor coil, without built-in suppressor module, 5 Mcycles mechanical durability.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

LX1FX048 specifications
ParameterValue
Control circuit typeAC 50/60 Hz
Main product or component typeContactor coil
Coil voltage48 V AC 50/60 Hz
Mechanical life cycles5 Mcycles

Product details

The LX1FX048 is a replacement coil for Schneider TeSys F-size contactors, wound for 48 V AC control at 50/60 Hz. That 48 V AC coil voltage is the single spec that decides whether this part matches your existing contactor base — if your panel runs 48 V AC control transformers, this coil drops straight in. The coil carries no built-in suppressor module, so you'll need to add an external RC snubber or varistor across the coil terminals if your PLC output card or relay drives inductive loads; omitting suppression can weld auxiliary contacts or damage the driver.

Durability and operating rate

Rated for 5 million mechanical cycles, which for a coil in a contactor means the armature and return spring are good for the life of most conveyor or pump panels. The maximum operating rate is 600 cycles per hour at 55 °C — that's about 10 operations per minute, enough for frequent start-stop duty on a compressor or fan, but not for high-speed pick-and-place or servo indexing. If your application cycles faster than that, the coil temperature rise will exceed the insulation class; you'd need a larger contactor frame or a reduced-duty cycle.

MPN
LX1FX048