Skip to main content
Schneider Electric LX1FX140

TeSys LX1FX140 Contactor Coil, 140 V AC 50/60 Hz, Active

MPN LX1FX140
Obsolete

Schneider Electric TeSys LX1FX140, contactor coil, 140 V AC 50/60 Hz, without built-in suppressor module, active lifecycle.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

LX1FX140 specifications
ParameterValue
Control circuit typeAC 50/60 Hz
Main product or component typeContactor coil
Coil voltage140 V AC 50/60 Hz
Mechanical life cycles5 Mcycles

Product details

The LX1FX140 is a replacement coil for the TeSys LX1F contactor range, wound for 140 V AC 50/60 Hz control circuits. If you're swapping a failed coil or stocking a spare for a panel full of LX1F contactors, this is the drop-in part — same footprint, same terminal layout. It ships without a built-in suppressor module, so plan on adding an external RC snubber or varistor across the coil terminals if your control circuit doesn't already provide one. Skipping it shortens the life of both the coil and any PLC output driving it.

A 120 V tap won't pull the coil in reliably; a 208 V tap will burn it out. Mechanical durability is rated at 5 Mcycles, which is solid for a line that cycles every few seconds but not a fit for a high-speed pick-and-place running 10 cycles per second — that would eat the mechanical life in under a week. Maximum operating rate is 600 cycles per hour at 131 °F (55 °C); derate further if the enclosure runs hotter.

Listed as Active — no end-of-life notice, no last-time-buy deadline. For a critical spare, keep one on the shelf; for a new panel build, verify the coil voltage matches your control scheme before committing the BOM line.

MPN
LX1FX140