Skip to main content
Schneider Electric LX1G3QLSEN

Schneider LX1G3QLSEN TeSys Giga Contactor Coil

MPN LX1G3QLSEN
Active

Schneider Electric TeSys Giga LX1G3QLSEN contactor coil, 200-500 V AC/DC 50/60 Hz, for LC1G115-225/3P standard contactors, built-in bidirectional peak limiting, push-in terminals, IP20.

$280.00 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

LX1G3QLSEN specifications
ParameterValue
Main product or component typeContactor coil
Coil voltage200...500 V AC/DC 50/60 Hz
IP ratingIP20
Temp storage max80 °C
Temp storage min-60 °C
Temp operating max60 °C
Temp operating min-25 °C
Storage temperature-76...176 °F (-60...80 °C)
Pollution degree3 IEC 60947-1
Depth3.7 in (94.0 mm)
Width4.2 in (105.7 mm)
Height5.7 in (144.5 mm)
Mechanical life cycles5 Mcycles
Operating time20...35 ms opening 40...55 ms closing
Operating temperature-13...140 °F (-25...60 °C)
Permissible ambient air temperature around the device-40...158 °F (-40...70 °C) at Uc

Product details

What this coil fits and why the voltage range matters

The LX1G3QLSEN is the control coil for Schneider Electric's TeSys Giga series, specifically the LC1G115 through LC1G225 three-pole standard contactors. It accepts 200...500 V AC/DC at 50/60 Hz, so it covers both 240 V and 480 V control circuits common in North American panels without needing a separate transformer tap. The built-in bidirectional peak limiting coil technology suppresses inrush spikes — 215 W / 295 VA inrush drops to 8 W / 13 VA holding. That matters for PLC output card sizing: the holding draw is low enough to run multiple coils off a single 24 VDC supply without exceeding the card's per-channel current limit.

Panel fit and wiring — push-in terminals save time

Dimensions are 5.7 in high by 4.2 in wide by 3.7 in deep (144.5 x 105.7 x 94.0 mm). The coil clips onto the contactor base; no extra DIN rail space is consumed beyond the contactor's own footprint. Control circuit push-in terminals accept solid or stranded wire from AWG 26 to AWG 12, or flexible with ferrule from AWG 24 to AWG 14. No screwdriver needed for termination — strip, push, done. That shanks a few minutes per panel when you're wiring a dozen starters.

Environmental and compliance — what the ratings actually mean

Rated pollution degree 3 per IEC 60947-1, meaning it tolerates conductive dust and condensation typical in unsealed industrial enclosures. IP20 finger-safe housing keeps live terminals out of reach behind the panel door. Operating temperature range -13 to 140 °F (-25 to 60 °C) with storage from -76 to 176 °F. At altitudes up to 3000 m no derating is needed; above that, up to 5000 m, apply the derating factor from the datasheet. Certified to EN/IEC 60947-4-1, UL 60947-4-1A, and CSA C22.2 No 60947-4-1 — the three standards that govern contactor and starter coordination. EMC immunity meets IEC 60947-4-1 criteria A and SEMI F47 voltage dip immunity, which is relevant for semiconductor fab tool power quality requirements.

Lifecycle and sourcing — active production, quoted to order

Sourced through authorized distribution channels against your BOM quantity.

MPN
LX1G3QLSEN