Skip to main content
Schneider Electric LX1G4SLSEN

TeSys LX1G4SLSEN Contactor Coil, 200-500V AC/DC, 4P

MPN LX1G4SLSEN
Active

Schneider Electric TeSys Giga LX1G4SLSEN contactor coil, 200-500 V AC/DC 50/60 Hz, 4-pole, built-in bidirectional peak limiting, IP20, 5 Mcycles mechanical durability.

$285.00 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

LX1G4SLSEN specifications
ParameterValue
Main product or component typeContactor coil
Coil voltage200...500 V AC/DC 50/60 Hz
IP ratingIP20
Temp storage max80 °C
Temp storage min-60 °C
Temp operating max60 °C
Temp operating min-25 °C
Storage temperature-76...176 °F (-60...80 °C)
Pollution degree3 IEC 60947-1
Depth3.7 in (93.0 mm)
Width7.3 in (185.0 mm)
Height6.6 in (167.0 mm)
Mechanical life cycles5 Mcycles
Operating time20...35 ms opening 40...55 ms closing
Operating temperature-13...140 °F (-25...60 °C)
Permissible ambient air temperature around the device-40...158 °F (-40...70 °C) at Uc

Product details

Coil voltage and what it means for your panel

The LX1G4SLSEN is the control coil module for TeSys Giga LC1G400-500/4P contactors, accepting 200-500 V AC/DC at 50/60 Hz — a wide-range coil that covers most global control voltages from 208 V to 480 V without needing a transformer tap change. Built-in bidirectional peak limiting electronics handle the inrush (300 W / 535 VA) and hold-in (8.6 W / 15.4 VA) power, so the PLC or relay output driving this coil sees a controlled load — no external varistor or RC snubber needed across the coil terminals.

Switching speed and endurance for high-cycle lines

Opening time is 20-35 ms, closing time 40-55 ms — fast enough for most motor start/stop sequences but not so fast that contact bounce becomes a problem on the main poles. Rated for 5 million mechanical cycles and a maximum operating rate of 600 cycles per minute at 60 °C ambient — this coil keeps up with high-speed pick-and-place or indexing conveyors without derating.

Standards and environmental tolerance

Certified to EN/IEC 60947-4-1, UL 60947-4-1A, and CSA C22.2 No 60947-4-1 — the coil meets the full contactor standard, not just a component-level listing, so the panel builder gets a single UL listing for the contactor assembly. Pollution degree 3 per IEC 60947-1 means it tolerates conductive dust and humidity typical in industrial enclosures without conformal coating. IP20 finger-safe terminals with push-in wiring accept 0.2-2.5 mm² solid or stranded with ferrule. Operates from -25 °C to 60 °C ambient and stores from -60 °C to 80 °C. Altitude rating is 3000 m without derating, 5000 m with derating — fine for most installations outside high-altitude mining.

Sourcing and lifecycle status

Quoted to order against your BOM quantity; availability and current pricing confirmed at RFQ time through authorized distribution channels.

MPN
LX1G4SLSEN