Skip to main content
Schneider Electric LX1LB150

TeSys LX1LB150 replacement coil, 150 V AC 50 Hz

MPN LX1LB150
Active

Schneider Electric TeSys LX1 series replacement coil, LX1LB150, 150 V AC 50 Hz, 207.57 Ohm, 75 VA inrush / 8 VA sealed.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

LX1LB150 specifications
ParameterValue
Main product or component typeCoil
Coil voltage150 V AC 50 Hz

Product details

The LX1LB150 is a replacement coil from the Schneider Electric TeSys range, designed to fit LX1 series contactors and control relays. It is a service part — the coil itself, not a complete contactor — intended for field replacement when the original coil fails or a different control voltage is needed. Rated for 150 V AC at 50 Hz control circuits, it draws 75 VA inrush at 0.55 power factor and settles to 8 VA sealed at 0.28 power factor. The average DC resistance measures 207.57 Ohm at 20 °C, within a ±10 % tolerance. Inductance is 6.6 H.

The 150 V AC 50 Hz rating is the control voltage the coil is wound for — apply that across the terminals and the magnetic circuit pulls in the contactor armature. The inrush figure (75 VA) is what the control transformer or PLC output must deliver momentarily; the sealed figure (8 VA) is the holding power after the contactor closes. A control transformer sized for the inrush peak avoids voltage sag that could prevent full pick-up. The 207.57 Ohm resistance at 20 °C is the coil winding's DC value, useful for verifying the coil with an ohmmeter before installation — a short or open winding reads well outside the ±10 % band. The 6.6 H inductance matters for suppression circuit design: a standard RC snubber across the coil contacts should be selected for this inductance to avoid excessive voltage spikes on dropout.

MPN
LX1LB150