Skip to main content
Schneider Electric LX4D7LD

TeSys LX4D7LD Contactor Coil, 200 V DC, for 80 A Contactor

MPN LX4D7LD
Obsolete

Schneider Electric TeSys Deca LX4D7LD, contactor coil, 200 V DC standard, for 80 A contactor, obsolete.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

LX4D7LD specifications
ParameterValue
Control circuit typeDC standard
Main product or component typeContactor coil
Coil voltage200 V DC
Temp operating max60 °C
Temp operating min-5 °C
Mechanical life cycles10 Mcycles
Time constant75 ms
Operating temperature23...140 °F (-5...60 °C)

Product details

The LX4D7LD is a replacement coil for the TeSys Deca contactor range, specifically wound for a 200 V DC control circuit and designed to fit the 80 A frame contactor. It pulls in at 22 W inrush and holds at the same 22 W, with a coil resistance of 1747 Ω at 20 °C. The 75 ms time constant tells you the coil's magnetic field builds at a rate that matches the contactor's mechanical response — fast enough for standard motor starting, not so fast it slams the armature.

Control voltage limits — the real-world fit

The drop-out threshold is 0.1 to 0.3 Uc (20 to 60 V DC), and the operational range is 0.85 to 1.1 Uc (170 to 220 V DC) at up to 55 °C. That means a 200 V nominal supply needs to stay above 170 V at the coil terminals under load — a long cable run or a sagging power supply will drop it out. No built-in suppressor module, so you'll want a free-wheeling diode across the coil if the drive circuit doesn't already have one.

This coil mounts directly onto the TeSys Deca 80 A contactor frame. The DC standard coil means the contactor is intended for a DC control bus — common in panel designs where the control voltage is rectified from the AC line or fed from a battery-backed DC supply. Ambient operating range is -5 to 60 °C, so it's fine inside a ventilated enclosure but not for direct outdoor exposure.

MPN
LX4D7LD