Skip to main content
Schneider Electric LX4FH030

TeSys LX4FH030 Contactor Coil, 30 V DC, Active

MPN LX4FH030
Active

Schneider Electric TeSys LX4FH030 contactor coil, 30 V DC, active lifecycle, 40-50 ms closing time.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

LX4FH030 specifications
ParameterValue
Control circuit typeDC wide range
Main product or component typeContactor coil
Coil voltage30 V DC
Temp operating max55 °C
Temp operating min-5 °C
Operating time40...50 ms closing 40...65 ms opening
Operating temperature23...131 °F (-5...55 °C)

Product details

The LX4FH030 is a replacement contactor coil from the Schneider Electric TeSys range, designed for DC wide-range control circuits at 30 V DC nominal. It is a service part — the coil itself, not the full contactor assembly — meant to restore a TeSys FH-series contactor to service without replacing the entire switching block. Operating time is 40 to 50 ms on closing and 40 to 65 ms on opening, which is typical for a DC-operated contactor coil in this class. The control voltage limits are 0.85 to 1.1 times Uc for reliable pick-up at 55 °C, and dropout occurs between 0.15 and 0.2 times Uc — meaning the coil releases cleanly below about 4.5 to 6 V DC, preventing chatter on a sagging supply. Average coil resistance is 1.37 Ω during inrush and 327.7 Ω in the holding state at 20 °C. That inrush-to-hold ratio is what lets the contactor pull in with high force then reduce power consumption once sealed. The coil ships without a built-in suppressor module, so any flyback diode or RC snubber must be added externally if the control circuit requires it.

Integration notes

The coil operates over an ambient temperature range of -5 to 55 °C. The DC wide-range control circuit accepts 30 V DC nominal, so verify the supply rail is stable within the 0.85 to 1.1 Uc window — a sagging 24 V DC bus will not reliably pick this coil. No built-in suppressor means the installer must add a free-wheeling diode across the coil terminals if the DC drive circuit does not already provide one. Without it, the inductive kick on dropout can damage PLC output cards or relay contacts driving the coil.

MPN
LX4FH030