Skip to main content
Schneider Electric LX4FH045

Schneider Electric LX4FH045 TeSys Contactor Coil, 45 V DC

MPN LX4FH045
Active

Schneider Electric TeSys contactor coil, LX4FH045, 45 V DC control voltage, DC wide range, without built-in suppressor module.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

LX4FH045 specifications
ParameterValue
Control circuit typeDC wide range
Main product or component typeContactor coil
Coil voltage45 V DC
Temp operating max55 °C
Temp operating min-5 °C
Operating time40...50 ms closing 40...65 ms opening
Operating temperature23...131 °F (-5...55 °C)

Product details

The Schneider Electric LX4FH045 is a replacement contactor coil from the TeSys range, designed to fit FH-series contactors. It operates on a 45 V DC control circuit with a DC wide-range coil technology, meaning it accepts a broader voltage band than a standard fixed-coil design — the operational limits span 0.85 to 1.1 times Uc at 131 °F (55 °C), and dropout occurs between 0.15 and 0.2 Uc at the same temperature. This gives the coil some tolerance for voltage sag on long control-wire runs without nuisance dropout. The coil draws an inrush resistance of 2.81 Ohm at 68 °F (20 °C) and settles to 611.4 Ohm holding at the same temperature. Closing time is 40 to 50 ms; opening takes 40 to 65 ms. The part carries no built-in suppressor module, so if your application requires flyback suppression (common with PLC or solid-state outputs driving the coil), you will need to add an external diode or RC snubber across the coil terminals.

The part belongs to the TeSys range (category 18401-WORLD SERVICE PARTS(CTR ACCESS)), which is Schneider's broad contactor and motor-control family. The LX4FH045 is a service-part coil, not a full contactor — it is intended as a field-replacement component for an existing FH contactor whose coil has failed.

Deployment context and integration notes

This coil mounts onto the FH-series contactor frame, which is a DIN-rail or screw-panel mounted device typical of motor-control centers and industrial control panels. If the panel ambient exceeds 55 °C, the coil's thermal margin narrows and dropout voltage shifts — verify the control voltage stays above 0.85 Uc at the elevated temperature. Because the coil lacks a built-in suppressor, the installer must account for the inductive kickback when de-energizing the coil. A free-wheeling diode across the coil terminals (cathode to positive) is standard practice for DC control circuits driven by a PLC output or relay. Without it, the voltage spike can damage the driving output or cause erratic behavior in nearby electronics. The coil's DC wide-range design helps with voltage tolerance but does not eliminate the need for external suppression.

MPN
LX4FH045