Skip to main content
Schneider Electric LX4FL027

Schneider LX4FL027 TeSys Contactor Coil, 27 V DC

MPN LX4FL027
Active

Schneider Electric TeSys LX4FL027 contactor coil, FK type, 27 V DC control voltage, without built-in suppressor module.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

LX4FL027 specifications
ParameterValue
Control circuit typeDC low consumption
Main product or component typeContactor coil
Coil voltage27 V DC
Temp operating max55 °C
Temp operating min-5 °C
Operating time40...50 ms opening 60...70 ms closing
Operating temperature23...131 °F (-5...55 °C)

Product details

The LX4FL027 is a DC low-consumption contactor coil from the Schneider TeSys range, built to swap into an FK-series contactor that needs a 27 V DC pull-in and hold. That 27 V DC control voltage is the spec that decides fit — not the common 24 V, so don't assume a standard 24 V coil will drop in. The coil has no built-in suppressor module, so you'll want to add a free-wheeling diode or an RC snubber across the terminals if your PLC output or relay driving it doesn't already handle the inductive kick.

Opening time runs 40 to 50 ms, closing time 60 to 70 ms — that's the full stroke, not just the armature pickup. For a safety circuit or a fast-cycling load, those numbers tell you the contactor won't respond faster than about 40 ms, so plan your timing budget accordingly. The coil holds in at 85 % of rated voltage (23 V DC) and drops out between 20 % and 35 % (5.4 to 9.5 V DC), which means it's tolerant of a sagging bus but won't chatter on a low-voltage brownout.

MPN
LX4FL027