Skip to main content
Schneider Electric LX9FF065

Schneider LX9FF065 TeSys F Contactor Coil, 65 VAC, Obsolete

MPN LX9FF065
Obsolete

Schneider Electric TeSys F series, LX9FF065, specific contactor coil, 65 V AC 40-400 Hz low consumption, obsolete status.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

LX9FF065 specifications
ParameterValue
Control circuit typeAC 40...400 Hz low consumption
Main product or component typeSpecific contactor coil
Coil voltage65 V AC 40...400 Hz
Temp operating max55 °C
Temp operating min-5 °C
Mechanical life cycles10 Mcycles
Operating time130 ms opening 35 ms closing
Operating temperature23...131 °F (-5...55 °C)

Product details

The LX9FF065 is a specific replacement coil for the TeSys F contactor range, wound for 65 V AC 40-400 Hz control circuits. It's a low-consumption design — inrush pulls 690-855 VA at 20 °C, then drops to 6.6-8.1 VA holding, with coil resistance settling at 152.2 Ω once sealed. Opening time is 130 ms, closing 35 ms, which is standard for this frame size. This is the coil only — no built-in suppressor module, so you'll need to add a varistor or RC snubber across the terminals if driving it from a PLC output or solid-state relay. The heat dissipation runs 5.9-7.2 W, so check for adequate ventilation inside the enclosure if multiple contactors are ganged.

This part is marked obsolete by Schneider. That's a solid service life for a contactor coil — the obsolescence isn't driven by wear-out, just Schneider's platform migration.

The 65 V AC control voltage is the first thing to verify — this is not a 24 V or 110 V coil. It operates between 0.85 and 1.1 Uc (55.25-71.5 V AC) and drops out between 0.35 and 0.55 Uc (22.75-35.75 V AC). If your control transformer is putting out 48 V or 120 V, this coil won't pull in reliably or will burn up. The inrush VA figure (690-855 VA) matters for transformer sizing — a 100 VA control transformer won't handle the inrush of this coil plus others pulling in simultaneously.

MPN
LX9FF065