Skip to main content
Schneider Electric LX9FG055

TeSys LX9FG055 specific contactor coil, 55 V AC, obsolete

MPN LX9FG055
Obsolete

Schneider Electric TeSys F, specific contactor coil, LX9FG055, 55 V AC 40..400 Hz low consumption, obsolete.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

LX9FG055 specifications
ParameterValue
Control circuit typeAC 40...400 Hz low consumption
Main product or component typeSpecific contactor coil
Coil voltage55 V AC 40...400 Hz
Temp operating max55 °C
Temp operating min-5 °C
Mechanical life cycles10 Mcycles
Operating time130 ms opening 35 ms closing
Operating temperature23...131 °F (-5...55 °C)

Product details

The LX9FG055 is a specific contactor coil from the Schneider Electric TeSys F range, designed as a replacement coil for TeSys F contactors. It operates on a 55 V AC control circuit at 40...400 Hz, with low-consumption coil technology — meaning it draws 950...1180 VA inrush and settles to 8.9...10.9 VA holding at 68 °F (20 °C). The coil dissipates 8...9.8 W of heat during continuous operation, which matters for enclosure thermal budgeting when replacing a failed coil in a panel.

Control circuit voltage limits are specified at 0.85...1.1 Uc for operational hold-in at 131 °F (55 °C), and drop-out occurs between 0.35...0.55 Uc at the same temperature. This means the coil reliably picks up when line voltage stays above 46.75 V AC and drops out cleanly below 19.25 to 30.25 V AC — important for brownout ride-through assessment on the control transformer. Operating time is 130 ms opening and 35 ms closing, which is standard for a contactor coil of this class. Ambient air temperature for operation spans -5...55 °C (23...131 °F), covering most indoor panel environments. The coil has no built-in suppressor module — if your control circuit requires flyback suppression (for PLC output or relay drive), you will need to add an external RC snubber or varistor across the coil terminals.

MPN
LX9FG055