Skip to main content
Schneider Electric LX9FH0242

TeSys LX9FH0242 Contactor Coil, 24 V AC, Obsolete

MPN LX9FH0242
Obsolete

TeSys F, specific contactor coil, 24 V AC 40...400 Hz low consumption, LX9FH0242.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

LX9FH0242 specifications
ParameterValue
Control circuit typeAC 40...400 Hz low consumption
Main product or component typeSpecific contactor coil
Coil voltage24 V AC 40...400 Hz
Temp operating max55 °C
Temp operating min-5 °C
Mechanical life cycles10 Mcycles
Operating time25 ms opening 45 ms closing
Operating temperature23...131 °F (-5...55 °C)

Product details

Part identity and fit

The LX9FH0242 is a specific contactor coil within the TeSys F range, designed as the replaceable solenoid for a TeSys F contactor frame. It is a 24 V AC coil rated for 40...400 Hz, low-consumption type, meaning it draws reduced hold-in power once the armature seats. This coil is not a standalone contactor — it is the magnetic actuator that mounts onto the contactor body. The operating time is 25 ms opening, 45 ms closing, which governs how fast the main poles break and make load current.

Coil electrical characteristics and suppression

Coil inrush power draws 560...660 VA at 68 °F (20 °C), dropping to 8...10 VA holding once the contactor is sealed. The average resistance is 0.84 Ω inrush and 18.6 Ω holding at the same temperature. Heat dissipation runs 8.4...10.4 W — that heat must be considered in a densely packed panel, particularly if the contactor cycles near its maximum rate of 3600 cycles per hour at 55 °C. This coil is supplied without a built-in suppressor module. An external RC snubber or varistor across the coil terminals is mandatory to limit back-EMF on the control circuit at dropout.

Schneider Electric has marked the LX9FH0242 as obsolete.

Mechanical durability and thermal limits

The ambient operating range is -5 to 55 °C; above that, coil temperature rise from the 8.4...10.4 W dissipation may exceed insulation class limits unless derated.

MPN
LX9FH0242