Skip to main content
Schneider Electric LX9FH0952

TeSys LX9FH0952 contactor coil, 95 V AC 40-400 Hz

MPN LX9FH0952
Active

TeSys F specific contactor coil, 95 V AC 40..400 Hz low consumption, LX9FH0952.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

LX9FH0952 specifications
ParameterValue
Control circuit typeAC 40...400 Hz low consumption
Main product or component typeSpecific contactor coil
Coil voltage95 V AC 40...400 Hz
Temp operating max55 °C
Temp operating min-5 °C
Mechanical life cycles10 Mcycles
Operating time25 ms opening 45 ms closing
Operating temperature23...131 °F (-5...55 °C)

Product details

The LX9FH0952 is a specific contactor coil from the TeSys F range, designed as a replacement or spare coil for TeSys F contactors. It operates on a 95 V AC control circuit at 40 to 400 Hz, with low-consumption coil technology. This coil does not include a built-in suppressor module, so you will need to add an external RC snubber or varistor across the coil terminals if your application requires suppression of switching transients — common on PLC-driven or electronic control circuits.

The coil draws 560 to 660 VA inrush at 68 °F (20 °C) across the 40-400 Hz range, dropping to 8 to 10 VA holding. That inrush figure tells you the momentary load on your control transformer when the contactor pulls in — make sure your 95 V AC supply can deliver that surge without dropping below the 0.85 Uc operational limit (80.75 V AC at 131 °F). Coil resistance measures 12.18 Ω inrush and 305 Ω holding at 68 °F (20 °C). The holding resistance is what determines steady-state current draw — roughly 0.31 A at 95 V AC — useful for sizing control circuit fusing. Heat dissipation runs 8.4 to 10.4 W. In a densely packed panel, that heat adds up; allow natural convection around the contactor or keep spacing per TeSys F guidelines. Opening time is 25 ms, closing time 45 ms. That 45 ms pull-in delay matters for sequencing logic — if you need faster response, this coil is not the pick.

Mechanical life and operating rate

That is one cycle per second — fine for most motor starting and general switching, but not for high-speed applications like rapid reversing or jogging duty.

MPN
LX9FH0952