Skip to main content
Schneider Electric LX9FJ912

Schneider LX9FJ912 TeSys F Contactor Coil, 24 VDC / 27-29 VA

MPN LX9FJ912
Obsolete

Schneider Electric TeSys F, specific contactor coil LX9FJ912, 24 V DC / 27...29 V AC 40-400 Hz control circuit, 60 ms opening / 20 ms closing, 10 Mcycles mechanical durability.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

LX9FJ912 specifications
ParameterValue
Control circuit typeAC 40...400 Hz low consumption DC low consumption
Main product or component typeSpecific contactor coil
Coil voltage24 V DC 27...29 V AC 40...400 Hz
Temp operating max55 °C
Temp operating min-5 °C
Mechanical life cycles10 Mcycles
Operating time60 ms opening 20 ms closing
Operating temperature23...131 °F (-5...55 °C)

Product details

The LX9FJ912 is a specific contactor coil from the Schneider TeSys F range, designed as the replaceable magnetic coil for TeSys F contactors. It operates the contactor's armature — 60 ms to open, 20 ms to close — which governs how fast the main poles make or break the load circuit. The control circuit accepts either 24 V DC or 27...29 V AC at 40...400 Hz, making it flexible for panels with mixed control voltages. Inrush power hits 500 VA at 20 °C; holding power drops to 23 VA once the armature seals. Heat dissipation runs 11.4 to 13.9 W, so the coil contributes noticeable thermal load inside the enclosure — factor that into cabinet sizing if multiple contactors are ganged. The coil lacks a built-in suppressor module, so you'll need an external RC snubber or varistor across the coil terminals if driving it from a PLC output or electronic timer.

This coil mounts directly onto the TeSys F contactor's magnet assembly — it is the replaceable element, not the full contactor. The control circuit voltage limits are 0.85...1.1 Uc for pickup at 55 °C, and dropout occurs between 0.3 and 0.5 Uc at the same temperature — useful to know when verifying hold-in on a brownout or long control-wire run.

MPN
LX9FJ912