Skip to main content
Schneider Electric LX9FK921

Schneider TeSys LX9FK921 Contactor Coil 63-70 VDC

MPN LX9FK921
Obsolete

Schneider Electric TeSys F, specific contactor coil, LX9FK921, 63..70 V DC, low consumption, 550 VA inrush.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

LX9FK921 specifications
ParameterValue
Control circuit typeAC 40...400 Hz low consumption DC low consumption
Main product or component typeSpecific contactor coil
Coil voltage63...70 V DC
Temp operating max55 °C
Temp operating min-5 °C
Mechanical life cycles10 Mcycles
Operating time60 ms opening 50 ms closing
Operating temperature23...131 °F (-5...55 °C)

Product details

Part identification and control voltage

The LX9FK921 is a specific contactor coil from the Schneider Electric TeSys range, designed for TeSys F contactors. It operates on a 63...70 V DC control circuit and is classified as low consumption. The coil draws an inrush power of 550 VA at 68 °F (20 °C) and a hold-in power consumption of 31 VA at the same temperature, with heat dissipation in the 15...18.3 W range during steady-state operation. This coil is supplied without a built-in suppressor module, so you will need to add external suppression if the control circuit demands it — standard practice for DC coils driving inductive loads.

Switching performance and durability

Opening time is 60 ms; closing time is 50 ms. These figures matter when sequencing contactors in a motor start circuit — the 10 ms asymmetry is typical for DC coils and must be accounted for in interlock timing. For high-duty applications like conveyor indexing or compressor cycling, this rate sets the practical switching ceiling. The ambient air temperature range for operation is 23 to 131 °F (-5 to 55 °C). The control voltage limits are 0.85...1.1 Uc for operational range and dropout at 0.3...0.5 Uc, both at 131 °F (55 °C).

The active status removes the urgency of a last-time-buy window, but given its role as a specific contactor coil for the TeSys F platform, verifying compatibility with the specific contactor frame (LX9F body) is the only integration check needed.

MPN
LX9FK921