Skip to main content
Schneider Electric LX9FK923

TeSys LX9FK923 Specific Contactor Coil, 80..88 V DC, Low Con

MPN LX9FK923
Active

TeSys F specific contactor coil, LX9FK923, 80..88 V DC, low consumption, 60 ms opening / 50 ms closing, no built-in suppressor.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

LX9FK923 specifications
ParameterValue
Control circuit typeAC 40...400 Hz low consumption DC low consumption
Main product or component typeSpecific contactor coil
Coil voltage80...88 V DC
Temp operating max55 °C
Temp operating min-5 °C
Mechanical life cycles10 Mcycles
Operating time60 ms opening 50 ms closing
Operating temperature23...131 °F (-5...55 °C)

Product details

The LX9FK923 is a specific contactor coil from the TeSys F range, designed as a replacement coil for TeSys F contactors. It operates on an 80...88 V DC control circuit and is classified as low consumption. This coil draws 550 VA inrush at 20 °C and holds at 31 VA, with heat dissipation between 15 and 18.3 W during continuous operation. The opening time is 60 ms and closing time is 50 ms, which matters when coordinating contactor timing in a motor starter or reversing circuit.

Coil voltage and control circuit

Rated for 80...88 V DC, the coil holds in from 0.85 to 1.1 Uc at 55 °C and drops out between 0.3 and 0.5 Uc. That dropout threshold is low — about 24 to 40 V — so the contactor stays pulled in during a sag, but will drop cleanly on a loss of control voltage. There is no built-in suppressor module, so you need to add an external flyback diode or RC snubber across the coil if the control circuit drives inductive loads like a PLC output or relay. Without it, the back-EMF from the coil can damage solid-state outputs.

Integration notes

Maximum operating rate is 3600 cycles per hour at 70 °C. The coil is AC and low-consumption DC compatible across 40 to 400 Hz — but note the DC voltage range is tight at 80...88 V. Verify your control transformer or DC supply stays within that band, especially under load.

MPN
LX9FK923