Skip to main content
Schneider Electric LX9FL923

Schneider LX9FL923 TeSys F Contactor Coil, 84-93 V DC, Obsol

MPN LX9FL923
Active

Schneider TeSys F specific contactor coil, LX9FL923, 84-93 V DC low consumption, obsolete.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

LX9FL923 specifications
ParameterValue
Control circuit typeAC 40...400 Hz low consumption DC low consumption
Main product or component typeSpecific contactor coil
Coil voltage84...93 V DC
Temp operating max55 °C
Temp operating min-5 °C
Mechanical life cycles5 Mcycles
Operating time60 ms opening 20 ms closing
Operating temperature23...131 °F (-5...55 °C)

Product details

The LX9FL923 is a specific contactor coil from the Schneider TeSys F range, designed to operate a TeSys F contactor when energized at 84 to 93 V DC. It is a low-consumption coil, drawing 48 W hold-in power at 68 °F (20 °C) with an inrush of 733 W at the same temperature. The coil technology is without a built-in suppressor module, so you'll need to add external suppression if the control circuit demands it. The control circuit accepts AC 40 to 400 Hz or DC low-consumption drive. Opening time is 60 ms, closing time 20 ms. Ambient operating temperature range is 23 to 131 °F (-5 to 55 °C).

The 84 to 93 V DC control voltage is tight — operational limits are 0.85 to 1.1 Uc at 131 °F (55 °C), meaning the coil will pick up reliably between roughly 71 V and 102 V DC. Drop-out occurs between 0.3 and 0.5 Uc (about 25 to 46 V DC). If your control supply sags below that, the contactor drops out. This matters for DC control buses with long cable runs or shared loads. Heat dissipation runs 22.8 to 27.8 W continuous. In a densely packed panel, that adds up — ensure adequate ventilation or derating if mounted alongside other heat sources. The 5 Mcycles mechanical durability is typical for a contactor coil; the limiting factor in practice is often the contactor's electrical endurance under load, not the coil itself.

MPN
LX9FL923