Skip to main content
Schneider Electric LXM18ESU15M2X

Schneider Electric LXM18ESU15M2X Easy Lexium 18 Servo Drive

MPN LXM18ESU15M2X
Active

Schneider Electric Easy Lexium 18 LXM18ESU15M2X motion servo drive, 1.5 kW at 220-240 V single phase, EtherCAT, integrated STO, IP20, compact housing.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

LXM18ESU15M2X specifications
ParameterValue
Main product or component typeMotion servo drive
Current15.8 A 144.77 % at 220...240 V, single phase
Frequency8 kHz
IP ratingIP20
Temp operating max45 °C
Temp operating min-5 °C
Depth166.5 mm
Width78 mm
Height155.5 mm
Operating temperature-5...45 °C

Product details

1.5 kW single-phase servo drive with integrated STO

The LXM18ESU15M2X is a 1.5 kW motion servo drive from the Easy Lexium 18 series, designed for single-phase 220-240 V supply. It delivers 9.5 A continuous output current at 8 kHz switching frequency, with a 3-second peak of 29.2 A for acceleration transients. The integrated Safe Torque Off (STO) function meets the safety circuit requirement without an external safety relay — the drive removes torque-producing power to the motor on the safety signal, which simplifies the wiring in guarding applications. EtherCAT is on board as the fieldbus interface, so the drive slots directly into a high-speed motion network with cycle times down to 125 µs. The integrated digital I/O handles local sensors and actuators without an extra slice.

Current delivery and supply constraints

The continuous output current is 9.5 A at 8 kHz switching frequency, and the line draw at full load is 15.8 A (144.77 % of the nominal) from the single-phase 220-240 V supply. The supply voltage limits are 170-255 V single phase, with a frequency tolerance of 47.5-63 Hz. The 3-second peak output current of 29.2 A covers the inrush for accelerating a load — the drive can deliver roughly 3× the continuous rating for short bursts, which is typical for servo applications that need high torque at low speed during ramp-up. This unit ships without an EMC filter. In a CE-marked installation, an external line filter is needed to meet conducted emission limits — factor that into the panel layout and BOM.

Panel fit and environmental limits

The compact housing measures 78 mm wide by 155.5 mm high by 166.5 mm deep — a standard footprint that fits alongside other Easy Lexium 18 drives on a DIN rail or backplate. The IP20 rating means it is protected against solid objects larger than 12 mm but not against moisture; install it inside a sealed enclosure in wet environments. Ambient operating temperature range is -5 to 45 °C, with altitude derating starting above 1000 m. The switching frequency is fixed at 8 kHz — no user adjustment for carrier frequency, so the motor whine and drive losses are set at the factory.

Active production, sourced to order

Sourced through independent distribution channels against an RFQ.

MPN
LXM18ESU15M2X