Skip to main content
Schneider Electric LXM18MESU50N4X

LXM18MESU50N4X Lexium 18M Servo Drive, 5.0 kW, EtherCAT

MPN LXM18MESU50N4X
Active

Schneider Electric Easy Lexium 18M motion servo drive, EtherCAT integrated, STO, 5.0 kW, three-phase 380…440 V, compact housing.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

LXM18MESU50N4X specifications
ParameterValue
Main product or component typeMotion servo drive
Current12 A at 380...440 V, three phase
Frequency8 kHz
IP ratingIP20
Temp operating max45 °C
Temp operating min0 °C
Depth230 mm
Width90 mm
Height250 mm
Operating temperature0...45 °C

Product details

What lands in the cabinet

The LXM18MESU50N4X: Three-phase 380…440 V input at 12 A line current feeds a continuous 16.5 A output stage at the 8 kHz switching frequency, with a 42 A 3-second peak available for acceleration transients — so the drive is rated to handle a motor whose continuous current sits inside that envelope and whose short-term demand stays within the 42 A peak ceiling.

Network, safety and EMC posture

EtherCAT is integrated on-board, so the drive drops onto the motion bus without a separate gateway module, and STO is part of the base feature set — the two pieces that usually drive an extra part-number suffix on a servo drive are already built in here. The unit ships without an EMC filter (line-side filtering is the panel builder's responsibility to size to the installation's wiring practice), and the enclosure is rated IP20 — meaning the drive is intended for installation inside a sealed cabinet, not on the machine surface.

Operational envelope

Operation is rated 0…45 °C ambient at altitudes up to 1000 m — both the thermal and the air-pressure headroom a typical European or North-American cabinet site sits comfortably inside without forced-air derating. Supply tolerance runs 342…484 V three-phase across 47.5…63 Hz, so the drive will tolerate factory bus drift and standard 50/60 Hz mains without special handling.

MPN
LXM18MESU50N4X