Skip to main content
Schneider Electric LXM18MPDU10N4X

Schneider Electric LXM18MPDU10N4X Servo Drive, 1.0 kW

MPN LXM18MPDU10N4X
Active

Schneider Electric Easy Lexium 18M servo drive, LXM18MPDU10N4X, 1.0 kW at 380-440 V three-phase, 3.5 A continuous, 11 A peak, 8 kHz switching, Modbus/PTI/PTO, IP20, 55 mm wide.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

LXM18MPDU10N4X specifications
ParameterValue
Main product or component typeMotion servo drive
Current2.4 A at 380...440 V, three phase
Frequency8 kHz
IP ratingIP20
Temp operating max45 °C
Temp operating min0 °C
Depth174 mm
Width55 mm
Height170 mm
Operating temperature0...45 °C

Product details

The LXM18MPDU10N4X is listed as current/active on Schneider Electric's lifecycle record — no phase-out notice, no last-time-buy window. This is a standard-catalog servo drive, not a legacy or end-of-life line. No stock-holding claim — quoted to order.

Power stage and current capability

Rated 1.0 kW nominal output at 380-440 V three-phase input, 8 kHz switching frequency. The continuous output current is 3.5 A at 8 kHz; the 3-second peak output current is 11 A — useful for acceleration transients on a servo axis without oversizing the drive. Line draw is 2.4 A at the same voltage range. Supply voltage limits span 342-484 V three-phase, with nominal 380-440 V at -10/+10 % tolerance. Network frequency range is 47.5-63 Hz.

Control interfaces and feedback

Communication is via Modbus (RTU/ASCII) plus integrated digital and analog I/O, PTI (pulse train input) and PTO (pulse train output). This covers basic positioning over Modbus or step/direction from a PLC motion controller without an extra fieldbus card. The drive carries no internal EMC filter — an external filter is required to meet CE emission limits in a panel installation. Factor that into the panel BOM and cabinet space.

Mechanical fit and panel integration

Width is the panel-space constraint — 55 mm per axis in a multi-drive cabinet. Depth at 174 mm means standard 200 mm deep enclosures clear the drive body with room for cabling clearance at the front.

MPN
LXM18MPDU10N4X